Remving de chrome trim

Need technical Q/A then you're in the right place

Moderator: martauto

demonbiker
E30 Zone Regular
E30 Zone Regular
Posts: 525
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hertfordshire - Good guys wear black!!

Post Sun Mar 06, 2005 9:49 pm

whats the best way to get the trim off without damage- got one side off but had to bend it a little- will be fine to refit(didnt kink it!)
Cheers
:roll:
'90 M5 3.6 "Driven Hard......Put Away Wet!! "
Top
User avatar
pete325i
E30 Zone Newbie
E30 Zone Newbie
Posts: 73
Joined: Tue Jan 11, 2005 11:00 pm
Location: Near Birmingham

Post Sun Mar 06, 2005 10:42 pm

I've just used some black insulation tape, if done carefully can look really nice.

Pete
Top
luxconvertible
E30 Zone Newbie
E30 Zone Newbie
Posts: 232
Joined: Tue Jan 11, 2005 11:00 pm
Location: essex

Post Mon Mar 07, 2005 10:48 pm

best way to do it is with a bit of plastic i personally use filler spreaders at work then lift up with a trim tool or a blunt scew driver!![i work in a body shop and remove quite a lot of trims!!]
good luck Ben
Top
demonbiker
E30 Zone Regular
E30 Zone Regular
Posts: 525
Joined: Mon Jan 10, 2005 11:00 pm
Location: Hertfordshire - Good guys wear black!!

Post Mon Mar 07, 2005 10:59 pm

will it give it a go cheers!
'90 M5 3.6 "Driven Hard......Put Away Wet!! "
Top

Return to “E30 Technical Help”