E30 Cosworth Resto Thread :D - small update

Show off your pride and joy here

Moderator: martauto

User avatar
Paulsimon8
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Tue Apr 18, 2006 11:00 pm
Location: Huddersfield Drives: Trains ;)

Post Sun May 07, 2006 7:09 pm

At last, the project is starting to get well under way - all the main parts have been collected together and as soon as the Cosworth shell has been removed by the scrapman, or whoever wants the damn thing, then its time to make a start on the zeemer :top: :top: :top:

So far I have aquired the following parts :cool:

1991 H reg 320i - full electrics etc etc, 1 owner from new, FBMWSH, 94k on the clock :eek: - £550 :top:

Image

Image

Image

Image

Image

Image

Image

Image



Totally rot free in all the usual rot places, Needs 2 new rear arches as they are bubbleing a bit, but something and nothing :top: :top: :top:


Full E30 M3 front and rear axles complete with M3 suspension, Brakes and uprated pads and discs, Polybushes and goodridge braided hoses, 3.64:1 LSD and driveshafts :top: :cool: :cool:

Image

Image

Image

Image



A SEXUAL Set of BBS Wheels- 17"x8.5" - yes, eight and a half inch WIDE :eek: :cool: shod with Pirelli P-Zero rubber (225/40 for the rear and 215/40 for the front :cool:

Image

Image



Various parts of bmw body-kit, A Genuine M3 rear wing and a leather tech-2 steering wheel + other niceities :cool: winkeye winkeye winkeye

Image

Image


And i've got the engine and gearbox sat waiting too :mad: winkeye

More updates to follow once i've gotten the project underway :cool: :top: :top: :o
Last edited by Paulsimon8 on Tue May 09, 2006 10:47 am, edited 1 time in total.
REEDY
E30 Zone Regular
E30 Zone Regular
Posts: 721
Joined: Mon Feb 14, 2005 11:00 pm
Location: Stamford Bridge, West Upper Shed End

Post Sun May 07, 2006 7:16 pm

Wicked project mate!

Noticed the MotorSport Development sticker!!

I was there not long ago! got myself a chip!!!
Image
fuzzy
He who sleeps with "Gingers"
Posts: 14351
Joined: Sat Jun 04, 2005 11:00 pm
Location: melbourne Australia

Post Sun May 07, 2006 7:17 pm

nice one mate,whats your planned time scale on this one? when do you expect it up and running? cosworth e30's are cool as fcuk :cool:
User avatar
Paulsimon8
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Tue Apr 18, 2006 11:00 pm
Location: Huddersfield Drives: Trains ;)

Post Sun May 07, 2006 9:20 pm

Reedy - Stu is a very good friend of mine, And the work he, Kenny and Nick undertake is amazing :D

Fuzzy - Timescale should be short - I hope to have the finished car on track at the RSOC National day in August 8O 8) 8) :wink: winkeye winkeye winkeye
REEDY
E30 Zone Regular
E30 Zone Regular
Posts: 721
Joined: Mon Feb 14, 2005 11:00 pm
Location: Stamford Bridge, West Upper Shed End

Post Sun May 07, 2006 9:41 pm

Paulsimon8 wrote:Reedy - Stu is a very good friend of mine, And the work he, Kenny and Nick undertake is amazing :D
For sure, very impressive work! I take it he`ll be doing your management then?? :wink:
Image
User avatar
Rich_W
E30 Zone Addict
E30 Zone Addict
Posts: 2932
Joined: Mon Jan 10, 2005 11:00 pm

Post Sun May 07, 2006 9:47 pm

Gracie :wink:

Im not sure Id fit a M3 spoiler, Id be thinking Sleeper/Euro look more fitting for a car with this engine in.
User avatar
Paulsimon8
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Tue Apr 18, 2006 11:00 pm
Location: Huddersfield Drives: Trains ;)

Post Sun May 07, 2006 10:20 pm

Reedy - Stu has waved the magic wand over my L8 ecu already - Its coilpack prepared and closed-loop controlled - All Stu will need to do is check the fueling, Altho i doubt the BMW fuel pump will be upto the job, so a Walbro uprated jobby will be fitted in-tank, Unless I can use that one to feed my Group-A 044 pump that I have winkeye winkeye winkeye


Hiya Rich - Will see what happens when the M3 spoiler arrives - Compare it with the tech-2 one I have in the shed and do a poll on Passionford - But for £30 for a genuine M3 rear spoiler I wasn't turning it down - re-sale value is that or more should I not use it :cry: winkeye
REEDY
E30 Zone Regular
E30 Zone Regular
Posts: 721
Joined: Mon Feb 14, 2005 11:00 pm
Location: Stamford Bridge, West Upper Shed End

Post Sun May 07, 2006 10:39 pm

Paulsimon8 wrote:Reedy - Stu has waved the magic wand over my L8 ecu already - Its coilpack prepared and closed-loop controlled - All Stu will need to do is check the fueling, Altho i doubt the BMW fuel pump will be upto the job, so a Walbro uprated jobby will be fitted in-tank, Unless I can use that one to feed my Group-A 044 pump that I have winkeye winkeye winkeye
i remember him talking to my mate about that closed loop control thing, he`s puttin a cossie lump in a mk2 escort, also he was talking about air injectors too????
Image
User avatar
Paulsimon8
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Tue Apr 18, 2006 11:00 pm
Location: Huddersfield Drives: Trains ;)

Post Mon May 08, 2006 7:20 am

Air injectors are for very accurate controlling of boost pressure - basically, they replace the amal valve and controll the boost by the ecu telling the injector to open at a set pressure which is written into the software, thus giving precise control of peak boost and held boost winkeye
User avatar
Paulsimon8
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Tue Apr 18, 2006 11:00 pm
Location: Huddersfield Drives: Trains ;)

Post Tue May 09, 2006 10:41 am

OK People, here are a few more pictures of what I've been upto yesterday morning and this morning also :top: :top:

Essentially, stripping the M3 parts down to seperate components, wire-brushing them (angle grinder with wire wheel :cry: ) and then giving them a couple of coats of paint winkeye



Rear Slip-Diff looking nice and blue :cool:

Image

Image


Rear Arms looking nice and black :cool:

Image

Image


Front kingpins and suspension legs in nice black :top:

Image


Front and rear calipers in a lovely shade of Blue :cool:

Image


Gave the nearly new front discs a going over with the wire wheel also, once again, they looks nice and fresh :banana: - Note the front anti-rollbar also :cool:

Image


Complete set of polybushes came with the M3 goodies - all as new, and also a set of Goodridge braided brake hoses too 8)

Image

Image



Thats all for the next couple of days, The best bit will start once the shitheap taxi shell has been removed and I can get the BMW into the garage for working on it winkeye
User avatar
martybee58
E30 Zone Newbie
E30 Zone Newbie
Posts: 18
Joined: Thu Mar 09, 2006 11:00 pm
Location: woodbridge, suffolk

Post Tue May 09, 2006 11:04 am

Bloody hell Paul!! You've been busy!! glad to see you are cracking on....

BTW, The diff is a 3.25 I think, as these were stock in the E30 M3.

I just had a thought, will the 235 rear tyres fit under stock arches?

Keep up the good work, Martin.
Jhonno
Homo Hair
Posts: 20362
Joined: Mon Jan 10, 2005 11:00 pm
Location: FLAT, FLAT, FLAT!!

Post Tue May 09, 2006 11:11 am

he's using 225.. they might go depending on width/offset of the wheels..
Got cable ties? Get diffin..

Arch roller for hire.

www.zeroexhausts.co.uk

Image
User avatar
Paulsimon8
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Tue Apr 18, 2006 11:00 pm
Location: Huddersfield Drives: Trains ;)

Post Tue May 09, 2006 11:13 am

Martin - No point in wasting my mornings before work when I can be cracking on with the project :wink: And cheers for letting me know about the diff ratio - means I can go a bit faster now in 5th :cry: :cry: :cry:

I'll get the wheels to fit at the back - the car may well be having new arches fitted at the rear due to some paint bubbleing, but not sure yet - however, If it does, then i have a friend who is a panel beater who can flare the arches slightly winkeye