Hi, Wired up my M30 conversion and I have got no ign every thing else works but turn the key and its dead.
ED
Help M30 wiring.
Moderator: martauto
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
That's because you haven't wired it right! You'll have to give a few more details than this.
Ignition supply to the engine loom is a green wire on pin 7 of the C101.
Ignition supply to the engine loom is a green wire on pin 7 of the C101.
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Hi, Right found the proplem when my brother fitted the ecu he disconected the plug from the ign switch. It will now turn over but will not fire I can't hear the fuel pump 
ED
ED
-
bigdek
- E30 Zone Camper
- Posts: 1115
- Joined: Thu Feb 10, 2005 11:00 pm
- Location: Fife Scotland
have you connected the red wires on the loom that used to connect to a constant live beside the ecu of the donor car as one of these un the fuel pump
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Hi, Yes they are connected to the battery.
ED
ED
-
ed325i
- E30 Zone Addict
- Posts: 4146
- Joined: Mon Jan 10, 2005 11:00 pm
Got it going 
these 2 wires where the wrong way round 
Thanks for help ED
these 2 wires where the wrong way round Thanks for help ED
-
bigdek
- E30 Zone Camper
- Posts: 1115
- Joined: Thu Feb 10, 2005 11:00 pm
- Location: Fife Scotland
VROOM !!! 
-
Andy335Touring
- Married to the E30 Zone
- Posts: 7144
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Long Eaton,Nottingham
Nice one dude 
One of them plugs was the CPS so the ECU didn't know the engine was turning over
One of them plugs was the CPS so the ECU didn't know the engine was turning over