V8 which gearbox
Moderator: martauto
-
bigdek
- E30 Zone Camper
- Posts: 1115
- Joined: Thu Feb 10, 2005 11:00 pm
- Location: Fife Scotland
which manual box would i need to mate up to a 4.0 v8 ?
-
E30BeemerLad
- Married to the E30 Zone
- Posts: 16806
- Joined: Mon Mar 28, 2005 11:00 pm
- Location: Norfolk
not sure if you'd need the 6sp manual box from the E39 540? was the manual box in the E34 540 a 6spd too?
prob worth sending a PM to Glenn
prob worth sending a PM to Glenn
-
Gravy
- E30 Zone Regular
- Posts: 318
- Joined: Tue Oct 11, 2005 11:00 pm
- Location: Whitchurch, Shropshire
Yeh i'm pretty sure it was a 6spd in the E34
-
Doni
- E30 Zone Newbie
- Posts: 8
- Joined: Thu Mar 17, 2005 11:00 pm
I'm sure, because I have one 6speed from an E34.Gravy wrote:Yeh i'm pretty sure it was a 6spd in the E34
The E39 M5 gearbox fits to the M60 engine. An the 6spd from E39 540i.
-
GermanGorilla
- E30 Zone Regular
- Posts: 528
- Joined: Mon Feb 07, 2005 11:00 pm
Hi,
Its the Getrag 280 / 6/ 6 speed.
A lot of 6 speed BMW's use it, but not sure which bell housing you will need.
The Getrag 280 / 6/6 was used on the -
E34 3.8 M5
E34 540i
E 36 3.2 EVO
E39 M5
E39 540i
E46 M3
And a few others that escape me, but its the bellhousing you need to make sure fits.
Hope that helps,
Regards,
The Gorilla.
Its the Getrag 280 / 6/ 6 speed.
A lot of 6 speed BMW's use it, but not sure which bell housing you will need.
The Getrag 280 / 6/6 was used on the -
E34 3.8 M5
E34 540i
E 36 3.2 EVO
E39 M5
E39 540i
E46 M3
And a few others that escape me, but its the bellhousing you need to make sure fits.
Hope that helps,
Regards,
The Gorilla.