my 32*i sport
Moderator: martauto
-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
Hello there
Thought this may interest you guys.
After getting bad news from my mechanic about my big end bearings being scrape I got thinking, do I rebuild the 2.5 or do I go for a 2.7 well I search about the Zone and got some info from people (may thanks) I got all the info needed for a 2.7 engine.
The engine spec:
525eta bottom end
525eta crank
525eta con rods
325i pistons
325i head
Its taken me about 2 months now to get everything sort with sending the block away to get decked and all the engine bits cleaned and to get all new parts (a big list lol) I've finally got it finished and in the car. Only on the road there last Wednesday and I must say I like lol a lot more torque in the lower rev's, still running the engine in so I've only rev'ed her to 3000rpm's I just wanna gun her and see what she can do but I'll have to wait awhile yet.
Anyways here's a few pic's to look at
http://www.teamlsm.com/staff/jonny/bm/zone/01.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/02.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/03.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/04.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/05.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/06.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/07.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/08.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/09.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/10.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/11.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/12.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/13.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/14.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/15.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/16.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/17.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/18.jpg
Have loads more photos will try and post them at the weekend
Thanks for looking
Thought this may interest you guys.
After getting bad news from my mechanic about my big end bearings being scrape I got thinking, do I rebuild the 2.5 or do I go for a 2.7 well I search about the Zone and got some info from people (may thanks) I got all the info needed for a 2.7 engine.
The engine spec:
525eta bottom end
525eta crank
525eta con rods
325i pistons
325i head
Its taken me about 2 months now to get everything sort with sending the block away to get decked and all the engine bits cleaned and to get all new parts (a big list lol) I've finally got it finished and in the car. Only on the road there last Wednesday and I must say I like lol a lot more torque in the lower rev's, still running the engine in so I've only rev'ed her to 3000rpm's I just wanna gun her and see what she can do but I'll have to wait awhile yet.
Anyways here's a few pic's to look at
http://www.teamlsm.com/staff/jonny/bm/zone/01.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/02.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/03.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/04.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/05.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/06.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/07.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/08.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/09.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/10.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/11.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/12.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/13.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/14.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/15.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/16.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/17.jpg
http://www.teamlsm.com/staff/jonny/bm/zone/18.jpg
Have loads more photos will try and post them at the weekend
Thanks for looking
Jonathan
-
maxfield
- Old Skooler

- Posts: 15185
- Joined: Sat Nov 26, 2005 11:00 pm
- Location: Mansfield

-
JAMZ
- E30 Zone Camper

- Posts: 1214
- Joined: Wed May 25, 2005 11:00 pm
- Location: Portsmouth
Yep loving that m8..
In the process of cleaning,painting engine.hopefully it will look like that once ive finished..
Good job
In the process of cleaning,painting engine.hopefully it will look like that once ive finished..
Good job
-
SHAZ325iSPORT
- E30 Zone Addict

- Posts: 2360
- Joined: Sat Mar 26, 2005 11:00 pm
- Location: East London
mate that looks beautiful,same conversion as mine
-
pete320i
- E30 Zone Newbie

- Posts: 127
- Joined: Tue Mar 28, 2006 11:00 pm
- Location: bedfordshire
thats one nice car mate, looks great.
320i dolphin grey.
-
rare
- E30 Zone Regular

- Posts: 590
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Sussex
Your car is fantastic buddy. Engine looks as good as the rest of it.
-
TW166Y
- E30 Zone Addict

- Posts: 3118
- Joined: Wed Jun 08, 2005 11:00 pm
- Location: Stoke (Clayheads)

Saying goodbye to 4-pot wrongness
-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
Cheers for all the good comments people, thanks
Still more work to do, well would like to do lol. Would like to upgrade the cam in time and get a 6 branch manifold but they'll come in time
@ JAMZ, good luck with the painting man be well worth it once she's finished
@SHAZ325iSPORT, have to love the 2.7's man, a lot more torque in the lower rev's I think, but what's it like over 3000rpms? I'm dieing to rev her right out lol
Still more work to do, well would like to do lol. Would like to upgrade the cam in time and get a 6 branch manifold but they'll come in time
@ JAMZ, good luck with the painting man be well worth it once she's finished
@SHAZ325iSPORT, have to love the 2.7's man, a lot more torque in the lower rev's I think, but what's it like over 3000rpms? I'm dieing to rev her right out lol
Jonathan
-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
cheers man, well for all the parts i got (loads of them) the machine work, the cleaning work and the engine i spent about 1500TW166Y wrote:mate very nice... how much did it cost you to do thew conversion?
Jonathan
-
ShepsEvo3
- Master of go faster
- Posts: 1881
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Bristol/Wiltshire
Thats sweet Jonny! Nice. 
E30 M3 Unichip Alpha N style conversions, this is the ultimate for extracting the best out of your S14 M power car.
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
Also, Live mapping of your Standard Motronic ECU for optimising all your modifications.
www.sabre-tuning.co.uk
-
Simon13
- The longest resto in the world !
- Posts: 22697
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Camberley, Surrey don't u know
very nice, so whats the spec on this engine as is? and what u wanna do to it?
-
keith52
- E30 Zone Camper

- Posts: 1427
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: SWANSEA
Really nice looking car, does she drive as well as she looks ? notice she's an import from Pembrokeshire
-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
the engine spec as isSimon13 wrote:very nice, so whats the spec on this engine as is? and what u wanna do to it?
525eta bottom end - decked
525eta crank
325i pistions (1989 - later ones)
325i head (cam, intake etc)
Zone 2.7 chip
new diff with 40% lock up
with getrag 260 gearbox
(new bearings, shells, piston rings and everything else down below)
would like to redo the head with all new parts with new cam (dont know what to go 4 tho), 6 branch manifold and maybe in time remove the AFM
only have 500miles on her at the mo so still taking her easy
Jonathan
-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
yes mate she pulls well, still running the engine in so can only rev her to 3000rpm'skeith52 wrote:Really nice looking car, does she drive as well as she looks ? notice she's an import from Pembrokeshire
yeah i got her imported from there 3 years ago next month
Jonathan
-
Tom944
- E30 Zone Newbie

- Posts: 110
- Joined: Wed Feb 15, 2006 11:00 pm
- Location: Netherlands
Omg JonnyBravo, your e30 looks absolutely stunning! Almost perfect for me ( the steering wheel is on the wrong side
). That engine, as new and better. Hope it goes like it looks when you have had the engine-run-in time 
E30 M50B25 racer soon-to-be E30 S50B30 racer
-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
Cheers manTom944 wrote:Omg JonnyBravo, your e30 looks absolutely stunning! Almost perfect for me ( the steering wheel is on the wrong side). That engine, as new and better. Hope it goes like it looks when you have had the engine-run-in time
loving your project
Jonathan
-
E30_Aza
- E30 Zone Regular

- Posts: 858
- Joined: Sat Mar 04, 2006 11:00 pm
- Location: Croydon
absolutly stunning mate!!!!!!!!! soooooo mint 
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
So when you do the 2.7 conversion you don't keep the oil cooler?
looks great mate
inspiring
toby
looks great mate
inspiring
toby

-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
cheers mantoby wrote:So when you do the 2.7 conversion you don't keep the oil cooler?
looks great mate
inspiring
toby
no you need to keep the oil cooler man
Jonathan
-
toby
- E30 Zone Addict

- Posts: 3609
- Joined: Thu Aug 11, 2005 11:00 pm
- Location: Kent
Ah it just looks like in picture 9 that it isn't there and the oil filter is going straight onto the block and no cooler. Am I missing something? Just curious...

-
JonnyBravo
- E30 Zone Newbie

- Posts: 183
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Antrim :: Northern Ireland
my mechanic put some oil in the engine and turned it over by hand a few times b4 it went in the car but the oil cooler is still neededtoby wrote:Ah it just looks like in picture 9 that it isn't there and the oil filter is going straight onto the block and no cooler. Am I missing something? Just curious...
Jonathan
