318is timing
Moderator: martauto
-
keggy
- E30 Zone Regular
- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
can ne1 tell me how to seting the timing on an m42 engine?
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
asume you mean cam timing ?
you need some special tools mate......
8mm drill bit to lock the flywheel up( hole is under starter in block webbing )
Straight steel rule.
lock flywheel, use straight edge, on edge accross the flats @ the rear of the camshafts,
Job jobbed
you need some special tools mate......
8mm drill bit to lock the flywheel up( hole is under starter in block webbing )
Straight steel rule.
lock flywheel, use straight edge, on edge accross the flats @ the rear of the camshafts,
Job jobbed
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
keggy
- E30 Zone Regular
- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
yeh thats wot i mean thanks 
-
keggy
- E30 Zone Regular
- Posts: 403
- Joined: Tue May 31, 2005 11:00 pm
- Location: omagh, Northen Ireland
ne1 know where i can find torque settings?