Hi again Guys
this is another 320 that I'm tryin to get going. As above Ive good spark and fuel pressure, car is turning over and just about to start but does'nt, I also swaped around the ecu with another with the correct numbers, no joy.
I know theres a couple of things I should be checking can you giv me a list?
thanks again
ger
320 with good spark/fuel pressure won't start
Moderator: martauto
-
Martinaston
- E30 Zone Addict
- Posts: 3749
- Joined: Mon Mar 14, 2005 11:00 pm
- Location: London
Crank sensor ?
Check the wires not rubbing on the water pump pully.
Check the wires not rubbing on the water pump pully.
There is NO nucleus.
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
DME relay is probably fubar(5 pin, on strut tower n/s/f), change it for a new/known working unit and try again.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
kirils
- E30 Zone Newbie
- Posts: 111
- Joined: Sun Sep 04, 2005 11:00 pm
i had the same problem with the rellay, it try to start but it wont... i changed it and it's perfect.
-
DelaneyG
- E30 Zone Newbie
- Posts: 111
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Croydon
could be flooded try unplugging the injector rail or removing the fuel pump relay turn it over an let the fuel burn then plug it back in and try again?
-
Globulator
- E30 Zone Regular
- Posts: 389
- Joined: Fri Sep 23, 2005 11:00 pm
Try Ezi-start sprayed down it. If it fires then the injectors probably are not.
You should be able to hear the injectors clicking.....
.... could be DME relay
You should be able to hear the injectors clicking.....
.... could be DME relay
-
DelaneyG
- E30 Zone Newbie
- Posts: 111
- Joined: Thu Apr 13, 2006 11:00 pm
- Location: Croydon
id be careful with easy start it can damage the bore,s if its used too much