bumper removal

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
cerbera84
E30 Zone Newbie
E30 Zone Newbie
Posts: 14
Joined: Sat Jan 14, 2006 11:00 pm

Post Wed Apr 19, 2006 7:26 pm

Hi does anyone know how to remove the front bumper on a 91 316i. is it bolted in place, if so how many and where are they, any tips would be greatly appricated. I had a front end shunt, and now the bumper (still in one piece) is pushed in one side, I'm hoping to be able to take it off and put it back on straight.
Top
Widge
E30 Zone Addict
E30 Zone Addict
Posts: 3661
Joined: Tue Jan 11, 2005 11:00 pm
Location: Leeds

Post Wed Apr 19, 2006 9:34 pm

HI mate, there's two Torx T55 bolts holding the bumper on from the underneath. Just un do them and it slides off forwards, may need a bit of a tug if it's been bashed, but persever they are the only two bolts. And don't forget to disconnect the indicators once you have got it a couple of inches off.
Top
User avatar
cerbera84
E30 Zone Newbie
E30 Zone Newbie
Posts: 14
Joined: Sat Jan 14, 2006 11:00 pm

Post Thu Apr 20, 2006 8:30 pm

Thanks for your help, I'll let you know how i get on
Top

Return to “E30 Technical Help”