I got an ARB a couple days ago thinking it was thicker than the one currently on my 318i Touring (didn't really check properly, bought on impulse!). The secondhand one came from a 325i Touring, however when I got under the car and offered it up it was exactly the same size O.D.
I therefore don't know if there is any difference, is the 325i type stiffer than the 318i type as I would have thought so?
Can anyone help as they are no visible ways off knowing unless I hack through it which is obviously not gonna happen!!!
Anti-roll bar
Moderator: martauto
-
Gravy
- E30 Zone Regular
- Posts: 318
- Joined: Tue Oct 11, 2005 11:00 pm
- Location: Whitchurch, Shropshire
-
Bob_S
- Engaged to the E30 Zone
- Posts: 5412
- Joined: Sat Jun 11, 2005 11:00 pm
- Location: chester, cheshire
front is the same, however the 325 tourings have a rear arb if I am correct!
Bollocks to this 24v scrap!
-
Gravy
- E30 Zone Regular
- Posts: 318
- Joined: Tue Oct 11, 2005 11:00 pm
- Location: Whitchurch, Shropshire
Doh! that'll teach me! Into the parts section it goes then..........