Propshaft differences

Need technical Q/A then you're in the right place

Moderator: martauto

Quaser
E30 Zone Addict
E30 Zone Addict
Posts: 2622
Joined: Sun Jan 09, 2005 11:00 pm
Location: West London

Post Wed Mar 29, 2006 5:13 pm

Hi Guys

Can anyone tell me the size differences in props for auto's, manual's early/late cars please?

I am converting my cab to a manual using a sport box, and the auto prop is too short, but the manual one i gave the garage is too long!

If anyone has a spare prop which will do the job - i need as well.

Cheers

Q
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Mar 29, 2006 6:34 pm

Prop length depends on engine,
325 is shortest I think,
320 is about an inch longer,
318 is about 2 inches longer,

These are the front halfs of manual props, I have no idea about auto props or the 16V engines
Last edited by DanThe on Thu Mar 30, 2006 5:50 pm, edited 1 time in total.
User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Wed Mar 29, 2006 6:41 pm

The length can be adjusted slightly.

Also, the centre bearing that bolts to the underside of the car is different between pre and post facelifts.
E30cabalan
E30 Zone Newbie
E30 Zone Newbie
Posts: 224
Joined: Fri Jan 14, 2005 11:00 pm
Location: South Wales

Post Wed Mar 29, 2006 11:03 pm

Does anyone know the actual lengths in mm.
I have been searching for this information for about 2 weeks now
with no luck.Actually want the length of a 325 auto propshaft.
Q you have a PM
smithy318i
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5797
Joined: Thu Apr 28, 2005 11:00 pm
Location: Tyne & Wear

Post Wed Mar 29, 2006 11:13 pm

Quite amazing.

I was just asking a similar question..

Im assuming that a 318i saloon and a 318i touring propshaft are different lengths? even though they have the same engine!
is this correct, or are they the same?
Image
User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Wed Mar 29, 2006 11:16 pm

Smithy - can't see how the saloon and touring would be different? Different diff or something to warrant a longer/shorter prop? Wheel base is no different so I imagine they would be the same.
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Wed Mar 29, 2006 11:49 pm

the diff bolts to the prop in the same place on all, just the auto's im not certain about.
The rears are the same length on all, its just the front sections that vary in length according to what gearbox is used I imagine

Didnt know about the centre bearings though
mrLEE30
E30 Zone Team Member
E30 Zone Team Member
Posts: 6589
Joined: Tue Jan 18, 2005 11:00 pm
Location: Sweating buckets in Bahrain

Post Thu Mar 30, 2006 5:44 am

325 is shortest I think,
320 is about an inch shorter,
318 is about 2 inches shorter,
Eh??? if the 325 is shortest how is the 320 an inch shorter??!!! typo?? longest??

and i think the prop on 325 and 320 autos are the same (i hope so as i changed my 325 prop for what the guy told me was a second hand 320 prop) if wrong please tell me!!!

also thought that all 6 cyl had the getrag 260 (with different ratios for sport) and thus the props would be same??

mrlee
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Thu Mar 30, 2006 3:29 pm

mrLEE30 wrote:
325 is shortest I think,
320 is about an inch shorter,
318 is about 2 inches shorter,
Eh??? if the 325 is shortest how is the 320 an inch shorter??!!! typo?? longest??

and i think the prop on 325 and 320 autos are the same (i hope so as i changed my 325 prop for what the guy told me was a second hand 320 prop) if wrong please tell me!!!

also thought that all 6 cyl had the getrag 260 (with different ratios for sport) and thus the props would be same??

mrlee
The 320i uses a 240 box.

The 320i prop is longer than the 325i prop by 36mm as the 320i gearbox is shorter, I have a pre-facelift 325i prop in my facelift 320i with 2.7 conversion and 260 gearbox. The prop centre bearing was the same on both cars.

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu Mar 30, 2006 5:51 pm

Edited :mad:
Bob_S
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 5412
Joined: Sat Jun 11, 2005 11:00 pm
Location: chester, cheshire

Post Thu Mar 30, 2006 7:13 pm

this is well confusing, I would suspect that the is prop is the shortest of the manuals as then engine is futher back in the bay?

as regards to the 2dr/touring prop I'd say it was the same
Bollocks to this 24v scrap!
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Thu Mar 30, 2006 9:53 pm

late 325i manual = 1489mm
late 320i manual = 1526mm
318i manual = ? (longer)
318 iS = ?
M3 = ?


You were 1mm out Iain :lol:
jonb
E30 Zone Addict
E30 Zone Addict
Posts: 3732
Joined: Sun Jan 09, 2005 11:00 pm
Location: bristol

Post Thu Mar 30, 2006 10:03 pm

as said.

the 325i prop is the shortest. the 320i type is longer due to having a smaller box.

the 318is prop is shorter than the m40 type. there is no difference"s between body type. all have the same wheelbase.

auto props are always shorter. the 320i and all non switchable boxes are longer and have a smaller diameter.

Q. get hold of a 325i manual prop. seems you have the wrong one.
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Fri Mar 31, 2006 3:12 pm

DanThe wrote:late 325i manual = 1489mm
late 320i manual = 1526mm
318i manual = ? (longer)
318 iS = ?
M3 = ?


You were 1mm out Iain :lol:
Aaaah smeg :banghead:

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
bigun
E30 Zone Regular
E30 Zone Regular
Posts: 386
Joined: Sat Jan 21, 2006 11:00 pm

Post Fri Mar 31, 2006 3:26 pm

dear me all this and all he has to do is get a manual 325 prop jod done
Templ8e30
E30 Zone Addict
E30 Zone Addict
Posts: 2801
Joined: Mon Jan 10, 2005 11:00 pm
Location: Ashton-under-Lyne, Lancashire

Post Fri Mar 31, 2006 6:03 pm

bigun wrote:dear me all this and all he has to do is get a manual 325 prop jod done
He has one but it doesn't fit !

Cheers,

Iain T
Image
2007 Mazda 6 2.0 estate
Political Correctness - A concept based on the idea that its possible to pick up a turd by the clean end !
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Tue Dec 19, 2006 1:27 am

DanThe wrote:late 325i manual = 1489mm
late 320i manual = 1526mm
318i manual = ? (longer)
318 iS = ?
M3 = ?


You were 1mm out Iain :lol:
Are these lengths when they are shortest.. or middle?
jamesh1977
BEWARE Zone Thief
Posts: 458
Joined: Thu Apr 27, 2006 11:00 pm
Location: central scotland

Post Tue Dec 19, 2006 2:38 am

this has confused the life out me..... so if i was to change my box to a sport box ( my car to my knoledge is running the standard 320i box mated to a 325i engine ) i would need to also change the propshaft as the box is a diffrent lenth ? is this right or am i really confused? (sorry for thread stealing just reading this has got me worried about future plans) is there anything else i would need to change? my car has allready got a lsd fitted but again not sure if this is a sport one or what
Image
topspark
E30 Zone Regular
E30 Zone Regular
Posts: 511
Joined: Mon Jan 10, 2005 11:00 pm
Location: Stockport

Post Tue Dec 19, 2006 2:54 am

this has confused the life out me..... so if i was to change my box to a sport box ( my car to my knoledge is running the standard 320i box mated to a 325i engine ) i would need to also change the propshaft as the box is a diffrent lenth ? is this right or am i really confused? (sorry for thread stealing just reading this has got me worried about future plans) is there anything else i would need to change? my car has allready got a lsd fitted but again not sure if this is a sport one or what
Yes 320i has getrag 240 box with LONGER prop 4:10ratio diff , while 325 has Getrag 260 with shorter prop and lower ratio diff 3:91 or 3:??? (cant remember). Basically if you put a sport box in , propshaft and diff need to go with it.
Last edited by topspark on Tue Dec 19, 2006 3:06 am, edited 1 time in total.
Image
1989 SCHWARZ 320i SE , 4 DOOR!!!!
You say the magic's gone,Well i'm not a magician
You say the spark's gone
Well get an electrician..........
jamesh1977
BEWARE Zone Thief
Posts: 458
Joined: Thu Apr 27, 2006 11:00 pm
Location: central scotland

Post Tue Dec 19, 2006 2:57 am

:cry: going to me dearer than i thought then ... supose can always sell my lsd so how do i check my ratio on my own diff so just incase on the off chance i do have the right one ?
Image
topspark
E30 Zone Regular
E30 Zone Regular
Posts: 511
Joined: Mon Jan 10, 2005 11:00 pm
Location: Stockport

Post Tue Dec 19, 2006 3:07 am

going to me dearer than i thought then ... supose can always sell my lsd so how do i check my ratio on my own diff so just incase on the off chance i do have the right one ?
Why what diff have you got??
Image
1989 SCHWARZ 320i SE , 4 DOOR!!!!
You say the magic's gone,Well i'm not a magician
You say the spark's gone
Well get an electrician..........
jamesh1977
BEWARE Zone Thief
Posts: 458
Joined: Thu Apr 27, 2006 11:00 pm
Location: central scotland

Post Tue Dec 19, 2006 3:15 am

thats the thing i dont really know the ratio on it i know its a lsd as ive had the rear end jacked up and turned the wheels to check.. the car is sitting with the drive train in it as i bought it all i know is the engine was changed a few years ago for a 25 as the origanall one snapped the t belt. the boy i bought the car off bought a 325 that had been involved in a smash and used the engine out that but i dont know what else he changed bar the engine.. but going by how well it goes i would imagine he changed more than the engine but i cant get hold of him to find out for sure. only thing is im going to be changing the engine at the start of the year as i cant see it going through an emission test for its next mot so i would like to do the job right if its not been done so
Image
oze30
E30 Zone Addict
E30 Zone Addict
Posts: 4133
Joined: Mon Oct 24, 2005 11:00 pm
Location: Sydney

Post Tue Dec 19, 2006 11:39 am

oze30 wrote:
DanThe wrote:late 325i manual = 1489mm
late 320i manual = 1526mm
318i manual = ? (longer)
318 iS = ?
M3 = ?


You were 1mm out Iain :lol:
Are these lengths when they are shortest.. or middle?
How long is a 325 auto prop?