Will a 2 Door Saloon Interior fit in a Cab?
Moderator: martauto
-
danny_j
- E30 Zone Newbie

- Posts: 220
- Joined: Sun Feb 12, 2006 11:00 pm
- Location: Southampton
Simple Question will a 2 door E30 interior fit directley in the cab or are they completely different interiors?
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
No it won't.
E30 in need of wiring loom smoke since April '11...
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
i know its gutty, but its a BIG NO. But im fitting e36 front seats in my cab
-
Ziggy
- E30 Zone Team Member

- Posts: 11534
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: floating round my tin can...
How's that going? The E36 seats are gonna be a pretty tight fit aren't they? Much modification needed to the subframes?cliffybabe wrote:i know its gutty, but its a BIG NO. But im fitting e36 front seats in my cab
E30 in need of wiring loom smoke since April '11...
-
cliffybabe
- Powered by Nelly

- Posts: 10020
- Joined: Sun Dec 18, 2005 11:00 pm
- Location: Croydon
really wired mate, tight they are but im getting their.
Had result though the two rear bolts are straight fit although the sub frame is wider, Their is another hole drilled through the car with a plastic scrw in place thats out and a bolt holding the seat is in.
The front has been a pain in the ass, had to drill 2 hole's in the front floor plan, I have checke dwith my local gargae and aslong as the bolts have big enough washers etc it will not be a MOt prob either. the drivers seat is in all but 1 bolt and the poassengers in all but the front bolts, they look great. here is a pic:

Had result though the two rear bolts are straight fit although the sub frame is wider, Their is another hole drilled through the car with a plastic scrw in place thats out and a bolt holding the seat is in.
The front has been a pain in the ass, had to drill 2 hole's in the front floor plan, I have checke dwith my local gargae and aslong as the bolts have big enough washers etc it will not be a MOt prob either. the drivers seat is in all but 1 bolt and the poassengers in all but the front bolts, they look great. here is a pic:

-
Quaser
- E30 Zone Addict

- Posts: 2622
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: West London
Only the front seats are interchangeable with other 2 door models of the e30 range (and obviously e36's
)
The rears dont fit cause of the doorcards.
The rears dont fit cause of the doorcards.
BMW E30 2.0 Convertible (M52B28)
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
BMW E30 2.0 2 Door (M20B28 Turbo project to start)
BMW E36 328i Sport (M52B28 Turbo Project)
http://www.e30zone.net/modules.php?name ... ic&t=68663
