Central locking still not working!

Post Tue Mar 01, 2005 5:36 pm

Still having central locking problems! have control unit out and cut the two red/black wires , and joined them together as brian moore suggested

now i'm not even getting the sound of the relay trying

anyone got any ideas?
thanks
320Touring

Post Tue Mar 01, 2005 5:40 pm

the loom in the door m8

Post Tue Mar 01, 2005 5:42 pm

just where it goes into the a post?

the relay was sounding up until i cut those wires-will it still be ok?

cheers

Post Tue Mar 01, 2005 6:13 pm

unplug the loom from the piller.

take the door card off and unplug the leccy windows, leccy mirror conector, actuator and solinoied then snip cable ites, then pull the old loom out the door
then replace buy reversing what you did with a new one

Post Tue Mar 01, 2005 6:15 pm

cheers!

any way i can over ride the central locking so i can open the other doors?i've only got access to boot, drivers door and petrol tank at moment!?

Post Wed Mar 16, 2005 8:49 pm

thank you!!

all sorted dodgy wire on the plug that goes into the relay!

Post Wed Mar 16, 2005 8:50 pm

opps wrong place :lol: