Taking cover off of the ecu?
Moderator: martauto
-
hammoj28
- E30 Zone Addict
- Posts: 3310
- Joined: Tue Jan 25, 2005 11:00 pm
- Location: Aberdeenshire.
Took the ecu out the car today. Tried to take the cover off but once i had the retaining clips bent back it still didn't wanna come off. Do I have to undo the hex key things too and the screws? The Zone tach guide reckons that its just the clips but it dont seem that way. Thanks in advance.
24v tech2
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
the 175 ECU is of the later/smaller type, you will need to remove the torx head screws around the edges, the ones in the central area hold the PCB in place.
HTH
HTH
Last edited by Ant on Mon Mar 06, 2006 8:37 pm, edited 1 time in total.
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
hammoj28
- E30 Zone Addict
- Posts: 3310
- Joined: Tue Jan 25, 2005 11:00 pm
- Location: Aberdeenshire.
Cool. Thanks thats pretty much all i needed to know.
24v tech2