7.5 x 17" alloys. 4 x 100 ET30

[chaosss]

Will these fit on my E30 318is. Suspension is lowered 30mm using G-Max springs

Excuse the springs they were a freebie.

I have been offered the above alloys (Borbet C's) for free, well in exchange I said he could rag my car round the track for a bit, from a mate with a Corrado.

I assume they will sit 5mm closer to the strut. Not sure on current clearance and not near the car to measure but I thought you guys would know.

If not I assume I could put 5mm spacers on but how much will this upset the handling?

[panesar_e30]

gp for it mate, they are top wheels and have been in this situation too.

go for 5mm spacers and u wont notice any major handling issues imo

give it a go, you got nuting to lose!

[woodysjw]

I have these in ET35 and had to use 10mm spacers

[Kos]

just make sure they are round, borbets are made from a soft alloy and have a habit of getting bent!! that why i have a few spare!!!

[chaosss]

Thanks for your help guys. Will let you know how I get on