My Touring has 40mm lowering at the back.
However if you stand at the rear and look at whilst its driving or standing still the right hand wheel has more negative camber than the left.
The Subframe bushes have just been done so it cont be anything to do with those.
Can worn trailing arm bushes do this?
Camber problem on Touring
Moderator: martauto
-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
-
jaistanley
- E30 Zone Addict

- Posts: 2517
- Joined: Tue Jan 18, 2005 11:00 pm
- Location: Coventry and Essex
They'd have to be very worn but yea, they could.
More likely the trailing arm has been in some sort of collision and is a little bent..
Check the bushes first.
Jai
More likely the trailing arm has been in some sort of collision and is a little bent..
Check the bushes first.
Jai

-
M5pilot
- E30 Zone Addict

- Posts: 4968
- Joined: Sun Jan 30, 2005 11:00 pm
- Location: Luton
Thanks for that Jai - will get it looked at.

