im gonna put a 3.91 slipper intp my iS at the weekend
i'll be doing it at work on my ramp, but i need to know what i have to do to make the large case slipper fit into my car that originally had a small case diff...
do i need the drive shafts from a 325i aswell or will my ones suffice???
any help is appreciated
i know tim_s has got a 3.91 slipper in his...
small case diff swap for large case diff swap HELP
Moderator: martauto
-
stuartgallafant
- E30 Zone Addict
- Posts: 4531
- Joined: Tue Mar 29, 2005 11:00 pm
- Location: Costa del Croydon
-
kam-325i
- E30 Zone Team Member
- Posts: 4851
- Joined: Tue Sep 27, 2005 11:00 pm
- Location: TELFORD !!!! (Shropshire) Stevetigger Land !!!
There is some fudging to be done with the driveshafts, but i cant remmember what it is...
Pete don't care about colour, He would shag a rainbow if he could find the end of it....
-
Lordschleife
- E30 Zone Squatter
- Posts: 1915
- Joined: Sun Jan 09, 2005 11:00 pm
- Location: Sunny Southsea
Cheers,
Robin
Robin
-
Dan318-is
- Married to the E30 Zone
- Posts: 8006
- Joined: Wed Jul 06, 2005 11:00 pm
- Location: Surrey/London
The propshaft needs to be shortened.
Its in two parts and should shorten by pushing it toward the engine if you understand?
Simple stuff stu im sure you'l figure it out!
Its in two parts and should shorten by pushing it toward the engine if you understand?
Simple stuff stu im sure you'l figure it out!