My New Wheel's :o)

Show off your pride and joy here

Moderator: martauto

jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Mon Feb 20, 2006 11:31 pm

Refurbed them myself and i am very impressed :D

Cleaned them up with some cellulose thinner's...
Image

And got to work...
Image
Image

Then spayed the lip in bright silver and voular :D
Image
Image

Just need some tyre's now, hopefully they will be on for Ace Cafe :D
Image
maxfield
Old Skooler
Old Skooler
Posts: 15185
Joined: Sat Nov 26, 2005 11:00 pm
Location: Mansfield

Post Mon Feb 20, 2006 11:40 pm

Good job
Image
Jon_Bmw
Dangerous when thinking
Dangerous when thinking
Posts: 7604
Joined: Tue Jan 11, 2005 11:00 pm
Location: Salisbury

Post Tue Feb 21, 2006 12:38 am

Very nice, i remember doing something very similar on some wheels I use to have on a mk2 golf, I just polished the lip instead. They will look mean :cool:
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Tue Feb 21, 2006 12:45 am

Jon_Bmw wrote:Very nice, i remember doing something very similar on some wheels I use to have on a mk2 golf, I just polished the lip instead. They will look mean :cool:
I was gonna polish the lip but thought against it as these are gonna be practise drifting wheel's :D I'm expecting to scrape a few kurb's so just a quick spray will do instead of crying :cry: :D
Image
TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Tue Feb 21, 2006 12:54 am

nice work fella, they look :cool:
Image
Saying goodbye to 4-pot wrongness
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Tue Feb 21, 2006 1:05 am

Cheer's TWIGGY, still like your's better but i would'nt want to drift with those beuaty's on :eek: :D :wink:
Image
nasir325ic
E30 Zone Regular
E30 Zone Regular
Posts: 627
Joined: Tue Feb 14, 2006 11:00 pm

Post Tue Feb 21, 2006 8:39 am

I remember doing something like that a few years ago, they look cool, i might do it again
Demlotcrew
E30 Zone Team Member
E30 Zone Team Member
Posts: 13329
Joined: Mon Dec 20, 2004 11:00 pm
Location: East Anglia

Post Tue Feb 21, 2006 10:01 am

They look cool!

Andrew
User avatar
Estoril-5
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Dec 11, 2005 11:00 pm
Location: Birmingham

Post Tue Feb 21, 2006 10:10 am

they look amazing mate!

you reckon you could give us a brief run down on how you did the wheels??

i want to have a go at my 17's.

gotta say fella, EXTRA :cool:
panesar_e30
E30 Zone Squatter
E30 Zone Squatter
Posts: 1579
Joined: Mon Jan 10, 2005 11:00 pm
Location: bucks

Post Tue Feb 21, 2006 10:14 am

good job mate!

i want to try do it myself too but will proly fcuk it up.

how did you get the finesh, where the spokes meet the lip? :?
dark_sounds
E30 Zone Addict
E30 Zone Addict
Posts: 2458
Joined: Thu Dec 01, 2005 11:00 pm

Post Tue Feb 21, 2006 10:46 am

good job! i wouldnt be brave enough to do it! how much it cost you in materials? and also how long did it take you for all four??

again nice one! :cool:
zaust
Zone day release
Posts: 13007
Joined: Sun Jan 09, 2005 11:00 pm
Location: Somewhere in Hertfordshire , or press Ctrl + W

Post Tue Feb 21, 2006 10:47 am

Nice one jon..
M30 Tech 1 Touring on gas.
Image
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Tue Feb 21, 2006 1:02 pm

Cheer's for your replies lad's, much appreciated :D


I'll give a description of what i done as people have asked :)

Buffed up the lip (Few kerb mark's) but have not done this perfect as they will be being used and abused :D
Cellulose thinner's on the wheel's with a cheap and cheerfull toothbrush (This take's the longest)
Light sanding down with some 600 wet'n'dry (Smooth :cool: )
Filler Primer 2-3 coat's
Let dry over night then another light sanding down
Mask off the lip (Very introcut and fiddly)
Gloss black the spoke's 3-4 coat's (Let dry over night)
Rip off masking tape, another light sanding on the lip as there is sticky stuff from the masking tape left behind, and cover the spoke's with new's paper and mask round the edge (Also very tricky)
Give the lip a good couple of coat's with "Bright Siler" spray paint (Let dry for 30 min's)
Take off new's paper and masking tape immediately after dryed as the tape, if left on too long, will take the the black off with it
Then leave to dry over night and laquar the wheel's.
This bit pissed me off cos' i did'nt realise the effect the laquar would do at first, it make's all the spoke's go dull :cry:
Make sure you throw on about 5 coat's of laquar because you will need to cut it back with some G3, you might get away with T-Cut.
The after effect is fantastic :D
No dull effect after cut back with protection for life :D
Image
dark_sounds
E30 Zone Addict
E30 Zone Addict
Posts: 2458
Joined: Thu Dec 01, 2005 11:00 pm

Post Tue Feb 21, 2006 2:19 pm

jonbouy,,,, want a job?? winkeye
nasir325ic
E30 Zone Regular
E30 Zone Regular
Posts: 627
Joined: Tue Feb 14, 2006 11:00 pm

Post Tue Feb 21, 2006 2:24 pm

I did my lip first, this avoids the tricky situation of maskin the centre. the lip can be treated with tcut to remove the stickyness.

Which ever way they still look great
User avatar
Estoril-5
E30 Zone Newbie
E30 Zone Newbie
Posts: 216
Joined: Sun Dec 11, 2005 11:00 pm
Location: Birmingham

Post Tue Feb 21, 2006 4:00 pm

did you use aerosols or a spray gun and compressor?
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Tue Feb 21, 2006 5:01 pm

dark_sounds wrote:jonbouy,,,, want a job?? winkeye
If your serious mate then yes, PM me what you want done :wink:
Estoril-5 wrote:did you use aerosols or a spray gun and compressor?
Aerosols mate, bit tricky in the wind :D
Image
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Tue Feb 21, 2006 6:48 pm

I took the liberty of using REEDY's car as an example, hope you don't mind REEDY :D

Image
Image
slideordie
E30 Zone Newbie
E30 Zone Newbie
Posts: 192
Joined: Wed Apr 27, 2005 11:00 pm
Location: N Ireland

Post Wed Feb 22, 2006 12:56 pm

look good mate, i started to do a similar thing to my BBS. Got one done but left the tape on too long so when i peeled it off it took the paint with it!

its very time consuming if you want a really good finish on them. what i did was:

clean all dirt off
removed kerbing by using a metal file and blending the lower spots in
removed all paint on dish
began by rubbing with 400 grit
then 600 grit
then 800 grit
primer
1000 grit wet
paint
1000 wet <--v. important IMO, removes orange peel and imperfections
lacquer
wax
autosol on dish
wax

took me 14hours to do one wheel! nightmare
i eneded up paying a bodyshop to do them and he was very impressed with the finish on the one i did apart from the dodgy edge!

get some pics up when you get them on the car
:D
Vier Töpfe Sind Besser: Ich Liebe Meines E30
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Wed Feb 22, 2006 1:43 pm

Will do mate :D
That's about how long it took me, there about's. I've just been doing them when i had the time to be honest but i knew something was going to go wrong as it was going too well, then i sprayed the laquar on and it all went dull (I did'nt know that this was supposed to happen :? ) and i started swearing at the fucker's LOL
Gave them a good polish up with Zymol and i like alot :D

I'm leaving the cap's off as the one's i got with them were in really bad condition so i'm gonna stick the chrome bolt's on that i have on these wheel's at the mo, rough and ready look :twisted:
Image
User avatar
Jimbob
E30 Zone Addict
E30 Zone Addict
Posts: 3731
Joined: Sun Jan 09, 2005 11:00 pm
Location: Poole

Post Thu Feb 23, 2006 2:00 pm

Great work there Jon 8)
All the hard work pays off in the end...when tyres are fitted and then put on the car, so hurry up mate and show us how she looks :lol: can't wait.
Project_E30
E30 Zone Camper
E30 Zone Camper
Posts: 1107
Joined: Thu Jan 13, 2005 11:00 pm

Post Thu Feb 23, 2006 2:18 pm

Sorry to sound thick but what was the product name that you used for cellulose thinner's?

Also was the sanding done by hand or using electric sander.

Finally if you could tell us what primers, paints and laquers you used that would be great.


Cheers
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Thu Feb 23, 2006 2:18 pm

Jimbob wrote:Great work there Jon 8)
All the hard work pays off in the end...when tyres are fitted and then put on the car, so hurry up mate and show us how she looks :lol: can't wait.
Cheer's geese :cool:

Trying to sort out some crappy tyre's from my old work place just for Ace Cafe, a couple of people are quite interested in me doing there's so i need to sell my work and at no better place than the Ace winkeye
Image
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Thu Feb 23, 2006 2:25 pm

Project_E30 wrote:Sorry to sound thick but what was the product name that you used for cellulose thinner's?

Also was the sanding done by hand or using electric sander.

Finally if you could tell us what primers, paints and laquers you used that would be great.


Cheers
Hi mate,

Don't know the product name of the thinner's as i got it off my dad, and he had it in old Jam jar's :?
Just your usual stuff i spose.
The buffing of the lip was done by an air tool with a buffer on the end.
When i sanded down, it was'nt harsh, just to make sure it was smooth and to stop orange peel.

Primer=Filler Primer
Paint's=Gloss Black & Bright Silver
Laquar=Laquar

This is all out of the local Car Shop (Autocare)
Image
Project_E30
E30 Zone Camper
E30 Zone Camper
Posts: 1107
Joined: Thu Jan 13, 2005 11:00 pm

Post Thu Feb 23, 2006 3:46 pm

Cheers
REEDY
E30 Zone Regular
E30 Zone Regular
Posts: 721
Joined: Mon Feb 14, 2005 11:00 pm
Location: Stamford Bridge, West Upper Shed End

Post Thu Feb 23, 2006 11:19 pm

jonbuoy wrote:I took the liberty of using REEDY's car as an example, hope you don't mind REEDY :D
LOL, Na mate, not a prob!!

They look sweet!!

Nice 1
Image
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Thu Feb 23, 2006 11:35 pm

Cheer's mate, glad you don't mind, it's just they look so right on your motor :D
Are you going to the Ace Cafe?
Would you take me out for a ride? I've never been in an M3 before :wink:
Image
eun
E30 Zone Camper
E30 Zone Camper
Posts: 1170
Joined: Thu Aug 04, 2005 11:00 pm
Location: plymouth

Post Fri Feb 24, 2006 11:40 am

thats an amazing diy job

get on jonbuoy :D
TW166Y
E30 Zone Addict
E30 Zone Addict
Posts: 3118
Joined: Wed Jun 08, 2005 11:00 pm
Location: Stoke (Clayheads)

Post Fri Feb 24, 2006 11:50 am

jonbuoy wrote:Cheer's TWIGGY, still like your's better but i would'nt want to drift with those beuaty's on :eek: :D :wink:
:D must admit fella i do miss sliding it :mad: pretty hard to slide now anyway with these big phat things winkeye
Image
Saying goodbye to 4-pot wrongness
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Fri Feb 24, 2006 6:13 pm

eun wrote:thats an amazing diy job

get on jonbuoy :D
Cheer's mate,

They've come up rather well but not show room condition :D
Look a little different in the flesh but still absolutely wicked :D
Image
REEDY
E30 Zone Regular
E30 Zone Regular
Posts: 721
Joined: Mon Feb 14, 2005 11:00 pm
Location: Stamford Bridge, West Upper Shed End

Post Fri Feb 24, 2006 6:50 pm

jonbuoy wrote:Cheer's mate, glad you don't mind, it's just they look so right on your motor :D
Are you going to the Ace Cafe?
Would you take me out for a ride? I've never been in an M3 before :wink:
LOL, cheers!

Yeah don`t mind takin ya for a spin!! Still learnin myself!
Image
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Fri Feb 24, 2006 6:58 pm

REEDY wrote:
jonbuoy wrote:Cheer's mate, glad you don't mind, it's just they look so right on your motor :D
Are you going to the Ace Cafe?
Would you take me out for a ride? I've never been in an M3 before :wink:
LOL, cheers!

Yeah don`t mind takin ya for a spin!! Still learnin myself!
Nice one mate, really appreciate this :D
Can't wait now, roll on Ace meet :cool:
Image
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Sun Feb 26, 2006 3:10 pm

Looking good now people :D

Image
Image
Image
Image
Image
Cava
E30 Zone Regular
E30 Zone Regular
Posts: 349
Joined: Sat Nov 19, 2005 11:00 pm
Location: South Wales

Post Sun Feb 26, 2006 3:15 pm

Look nice, combine well with the black grill. :D
jonbuoy
E30 Zone Addict
E30 Zone Addict
Posts: 2092
Joined: Wed May 04, 2005 11:00 pm
Location: Basildon, Essex

Post Sun Feb 26, 2006 3:21 pm

Cheer's mate, make's me feel like i should have left the rubbing strip's on the bumper black but it look's good so i'm proud of my work :D
Image