hi, i have a 320i, and when i press the accelerator pedal suddenly and quickly, there is no response and also sometimes the car wants to kind of stall...
only when i press the pedal slowly and way down then i get throttle response...
i tried to adjust the throttle cable, but still the same..
i dont know what to do?? any idea please
throttle response???
Moderator: martauto
-
jonbuoy
- E30 Zone Addict

- Posts: 2092
- Joined: Wed May 04, 2005 11:00 pm
- Location: Basildon, Essex
-
m3mpower
- E30 Zone Newbie

- Posts: 136
- Joined: Mon Feb 13, 2006 11:00 pm
- Location: north london
hi, i have put new spark plugs already, can you tell me what is the best way to clean the air flow meter and the idle air control valve?
cheers
cheers
-
gcorky
- Boost Junkie
- Posts: 2009
- Joined: Tue Jul 12, 2005 11:00 pm
- Location: n.e england
-
johnono
- E30 Zone Addict

- Posts: 4677
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: land of the vikings
check for air leaks / cracked hose on the afm boot ( the L shaped pipe that goes from afm to tb

also air intake gasket under intake manifold, or all the pipes connected to the tb, afm and filterbox should have a good once over

also air intake gasket under intake manifold, or all the pipes connected to the tb, afm and filterbox should have a good once over
-
m3mpower
- E30 Zone Newbie

- Posts: 136
- Joined: Mon Feb 13, 2006 11:00 pm
- Location: north london
can i use break cleaner to clean the air flow meter and the idle air control valve??
-
m3mpower
- E30 Zone Newbie

- Posts: 136
- Joined: Mon Feb 13, 2006 11:00 pm
- Location: north london
hi, all done now, everything works fine, cheers
-
jonbuoy
- E30 Zone Addict

- Posts: 2092
- Joined: Wed May 04, 2005 11:00 pm
- Location: Basildon, Essex
-
e30bmlover
- Ac Schnitzer prophet

- Posts: 5352
- Joined: Sun Sep 11, 2005 11:00 pm
- Location: Playing on the ring road!!!
you could try a new distributor cap.......just a thought, and while u are at it....get a new rotor arm as well
-
m3mpower
- E30 Zone Newbie

- Posts: 136
- Joined: Mon Feb 13, 2006 11:00 pm
- Location: north london
thanks guys for the advice, everything sweet.. i will probably change the rotor arm and the distributor cap as well,


