Next job.

[minesapint]

This is the next job on the car.

IMG_4191.jpeg

I’ve had the slave cylinder off before, which is not easy grovelling under the car, but never the master.
There’s a good write-up on the Wiki re the slave, but no details at all on doing the master cylinder. I wondered why!
Does anyone have a post on it to make life easier.
Cheers

[minesapint]

Sorry I should have put this in technical help.

[Speedtouch]

There's a few guides on YouTube covering this.

[minesapint]

Yes I’m sure.
Looking in Technical help there’s a post made into a sticky from Paultv written in Aug 2019, with advice & tips , but no pictures, I like pictures they save so many words.
I think the Wiki needs more info on changing the master clutch cylinder, in the style it does for the slave cylinder, which is an excellent article. I notice that the great Mr Mooore & others were involved so it’s guaranteed to be perfect.

[DanThe]

For the master cylinder I would strongly recommend buying a new length of hose and the plastic fitting that connects the two together

[minesapint]

Do you mean parts 07 & 08 in diagram?

IMG_0136.png

If so thanks bud…..all tips gratefully accepted.
Any more?
Cheers

[minesapint]

Not a particularly difficult job just very awkward working in tight area around the pedal set.

IMG_4210.jpeg

IMG_4214.jpeg

[minesapint]

Working on the slave much more difficult, as having no clutch meant I couldn’t drive onto the car ramps,so struggled with little space.
Anyway done now ……..they’ll see me out!
Cheers