Having just dropped my m20b25 motor back in the engine bay the heater isn't working
The pipe that comes from the back of the cylinder head does it go on the top or the bottom of the heater inlet pipes?
Cheers
Ian
Heater pipes
Moderator: martauto
-
- Old Skooler
- Posts: 14009
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
The Wiki guide may be of some help:
https://www.e30zone.net/e30wiki/index.p ... oubleshoot
https://www.e30zone.net/e30wiki/index.p ... oubleshoot
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
So I swapped the heater pipes around so the one from the head goes on the bottom of the heater inlet and made sure there was coolant in the top hose just before fitting it
Heater works now
I believe it matters which way round the pipes are fitted
I just need to get some miles on the fresh engine now
Cheers
Ian
Heater works now
I believe it matters which way round the pipes are fitted
I just need to get some miles on the fresh engine now
Cheers
Ian