Obc 13 button bc stalk not working

[Gaffasgaff]

Hello guys. Struggling to work out why my indicator bc button isn't working. This has stopped 10 years ago when I had my Clifford alarm professionally installed. It never really bothered me much as the car spent most its life in storage. I finally bought a house with a garage where i can now tinker wife my pride and joy . I have done a continuity test on the pins on the indicator switch and the bc button is making contact. So I have notice there is a blue single pin connector and nothing is going to it . I have spent a good half hour searching for a wiring around that area that would plug into that thinking it's come off while he did the alarm and i cannot find anything. Am i on the right track here is something suppose to connect to this inorder for it to work . If so where dose the wire come from. Any help would be much appreciated

[BenHar]

Does this page from the wiki help?

https://www.e30zone.net/e30wiki/images/ ... mputer.pdf

Ben

[Gaffasgaff]

Does this page from the wiki help?

https://www.e30zone.net/e30wiki/images/ ... mputer.pdf

Ben

Thank you Ben.
I cannot work it out

[Gaffasgaff]

Any ideas any one

[Gaffasgaff]

I have the 13 button obc. I can't find a cable to fit this .

[biffer]

On my car,the single cable you are looking for hangs down from where the main OBC loom loops over the top of the instrument-cluster

[Gaffasgaff]

On my car,the single cable you are looking for hangs down from where the main OBC loom loops over the top of the instrument-cluster

Cheers biffer
I have searched around and cannot see it at all .
I got round looking and understanding the wiring diagram and I beleave it's coming from pin 4 of the obc . So I will trace it from there and hopfully will see if I can locate it . Weekend job now . Thank u

[biffer]

Mine is a single thin, black wire, a few inches long,with the blue connector on the end, and it hangs down either just to the left of the cluster,or behind it-can't remember which

[Gaffasgaff]

Mine is a single thin, black wire, a few inches long,with the blue connector on the end, and it hangs down either just to the left of the cluster,or behind it-can't remember which

Fixed!!!!!!

Finally found that wire tucked behind the centre console. God knows how it's got there.
Cheers.

[martauto]

Mine is a single thin, black wire, a few inches long,with the blue connector on the end, and it hangs down either just to the left of the cluster,or behind it-can't remember which

Fixed!!!!!!

Finally found that wire tucked behind the centre console. God knows how it's got there.
Cheers.

Mart.