Power Point in Glove Box - Plug C302 Connector Part Number

[TurtleDesignTech]

Looking to connect up an additional cigarette lighter/USB charging point in the glove box.

Ideally would like to pull power from plug C302.

Accessory.jpg

Has anyone done this before? If so, are the parts still available to create a OEM style connector?

[flybynite]

Looking to connect up an additional cigarette lighter/USB charging point in the glove box.
Ideally would like to pull power from plug C302.
Has anyone done this before? If so, are the parts still available to create a OEM style connector?

I have had quite a few pins and plugs for the E30/36/46 from Cotswolds over last few years, It can be trial and error on RealOem but I'm sure if you give Jon a shout at Cotswolds he will have a better look on his system for the right shape plug

[TurtleDesignTech]

Looking to connect up an additional cigarette lighter/USB charging point in the glove box.
Ideally would like to pull power from plug C302.
Has anyone done this before? If so, are the parts still available to create a OEM style connector?

I have had quite a few pins and plugs for the E30/36/46 from Cotswolds over last few years, It can be trial and error on RealOem but I'm sure if you give Jon a shout at Cotswolds he will have a better look on his system for the right shape plug

Good idea. Have contacted Jon. Will post the part numbers here if we manage to find them.

[Contours]

They are of a female type bullet connecter so would imagine an electrical outfit should be able to supply them. You could power the unit off terminal H on the C302 which would be for an amp where fitted and is controlled by fuse 27 which also controls the central locking circuit. (30amp)