BMW E30 318iS, 318i, 316i fuel pump

[rix313]

I see lots of posts on the insufferable Facebook groups asking about fuel pumps for these models. So in the vein hope that people do search for things before; check out the Sytec ITP344 fuel pump. Direct replacement and very reliable and inexpensive.

https://www.glencoeltd.co.uk/hi-in-tank ... 580453019/

[Brianmoooore]

Certainly a good price. The pic. shows the complete pump assembly for an E30, but doesn't acknowledge that there is a one pipe assembly and a two pipe assembly, depending on which tank you have. The pic. shows a one pipe assembly, as far as I can see, which cannot be used on a tank that requires two pipes (although the other way around can be used).
Or is it just the pump, filter, a piece of pipe and hose clips that are supplied for fitting to your existing frame?

Edit: Just found the pump from Glencoe Ltd for £49.00, and that site clearly states that the frame isn't included.

[rix313]

Yes quite Brian, maybe I didn’t make it clear the intention of the post was to inform people of a replacement pump that can be fitted to the standard assembly, rather than the entire assembly

[TheDutch]

I put a Bosch 0 580 314 070 in my 318is. It wasn't hard to incorporate with the existing assembly. It was about £90 (albeit a few years ago).

[YODI]

I see lots of posts on the insufferable Facebook groups asking about fuel pumps for these models. So in the vein hope that people do search for things before; check out the Sytec ITP344 fuel pump. Direct replacement and very reliable and inexpensive.

https://www.glencoeltd.co.uk/hi-in-tank ... 580453019/

And here I am, Via google, whilst looking for fuel pumps for my 91 'IS'


I will order this shortly, I don't know its my issue but for £50 it's good to change anyway.

[rix313]

I’m glad it worked bro

I’ve fitted a few to my own and customer cars and they’re great.

[YODI]

I’m glad it worked bro

I’ve fitted a few to my own and customer cars and they’re great.

About to tackle this, any tips or is it literally a swop over with two wires to solder?

[rix313]

Yep that’s all it is mate