Good welders in Guildford area?

Need technical Q/A then you're in the right place

Moderator: martauto

oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Wed Feb 15, 2006 10:45 pm

As title says really, may need some welding doing in a few weeks and would rather go to some one whos been recomended.
cheers
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Wed Feb 15, 2006 11:04 pm

i know some one, but not in guilford!!!!
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Wed Feb 15, 2006 11:06 pm

How far Kos?
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Wed Feb 15, 2006 11:17 pm

but of a treck..........watford !! my M3 is going there for a lot of work, but its major track prep shit !!!!
what you after, if its minor work dips can do it aswell, he is near me in isleworth/hounslow. he also come very highly recomended
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Wed Feb 15, 2006 11:59 pm

yea watford might be a bit too far, so dips might be just the man.
Basicly, ive stripped out half my interior, carpet out tomorow gonna drive it for a bit and see if i can find out what leeks i have.
Have already had a look at a good bit of the pasengers side and rust is really minor, fingers crossed for the rest of it!
Illl post up some pics of the worst of it and see what you recon needs to be done.
Wanna get it water tight again, pissed off with wet carpets
User avatar
Kos
E30 Zone Team Member
E30 Zone Team Member
Posts: 15448
Joined: Tue Jul 12, 2005 11:00 pm
Location: London / Cyprus

Post Thu Feb 16, 2006 1:25 am

no probs dude, let me know when you figured where its coming from and i'll put you in contact with dips, or you could just pm him.
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Thu Feb 16, 2006 1:59 am

cheers dude
dips346
London Meets Main Man
Posts: 3977
Joined: Fri Jan 14, 2005 11:00 pm
Location: heston/heathrow

Post Thu Feb 16, 2006 9:38 am

hi post the pics up and i will see how bad it is
oguz327
Captain Armco
Captain Armco
Posts: 4174
Joined: Tue Oct 25, 2005 11:00 pm
Location: Hampshire

Post Thu Feb 16, 2006 5:19 pm

Here they are buddy, not too bad on passenger side, bit of rust.
driver side not looking too good though especialy aroun the accelerator pedal.
also one of the plugs need weldin a plate over

Image
Image
Image
Image
Image


Image
Image

Any opinions or advise welcome