I'm looking for repair pannels for the front inner arch, so called jacking points and floor near and off side, thanks in advance.
Were can I get e30 repair panels?
Moderator: martauto
-
Callumogy
- E30 Zone Newbie

- Posts: 4
- Joined: Thu Jan 30, 2020 9:49 am
- Location: England (uk)
Hi all I'm new to useing forums so excuse me if this isn't the correct way to do this.
I'm looking for repair pannels for the front inner arch, so called jacking points and floor near and off side, thanks in advance.
I'm looking for repair pannels for the front inner arch, so called jacking points and floor near and off side, thanks in advance.
-
paultv
- E30 Zone Squatter

- Posts: 1545
- Joined: Mon Apr 21, 2014 11:00 pm
- Location: Auf dem Schnee: Germany
There are many parts available from BMW - check with John at Cotswolds on this forum,
There's cheap panels from various UK suppliers on the net such as:
https://www.carbodypanels4u.co.uk/bmw/3 ... 3-1987-e30
and also there's these guys who make good quality panels too:
https://www.valcasgarage.com/category/bmw-e30/
and most BMW parts suppliers such as:
https://www.schmiedmann.com/en/bmw-E30/ ... 22-catn-ol
Paul
There's cheap panels from various UK suppliers on the net such as:
https://www.carbodypanels4u.co.uk/bmw/3 ... 3-1987-e30
and also there's these guys who make good quality panels too:
https://www.valcasgarage.com/category/bmw-e30/
and most BMW parts suppliers such as:
https://www.schmiedmann.com/en/bmw-E30/ ... 22-catn-ol
Paul
4th May 1990 325i Convertible.
BMW E30 Cabriolet Best Mod Ever:
https://bmwe30cabriolet-wdm.blogspot.com/
BMW E30 Cabriolet Best Mod Ever:
https://bmwe30cabriolet-wdm.blogspot.com/
-
Callumogy
- E30 Zone Newbie

- Posts: 4
- Joined: Thu Jan 30, 2020 9:49 am
- Location: England (uk)
Thanks Paul I'll have a look at those. 
-
martauto
- E30 Zone Team Member

- Posts: 6207
- Joined: Wed Aug 31, 2005 11:00 pm
- Location: leeds
Welcome to the zone mate and you are right to do it this way !!
What do you drive and pop some pics up please
Mart.
Only the E46 cab left now.
Just got too old.
Just got too old.
-
Callumogy
- E30 Zone Newbie

- Posts: 4
- Joined: Thu Jan 30, 2020 9:49 am
- Location: England (uk)
Hi mart thanks for the welcome, sorry I didnt see your reply,
I've got a face lift 1987 320 se
So far I've polly bushed the rear end, lowered it 20mm on ebatch springs and bilsien shocks.
And fitted a custum lsd with the right gearing for a 320 but wish I'd got the 325 ratio as its revs really hiegh on the Duel carrige ways.
Got a lot of plans for the car but plan on keeping it for the long term so I'm in no rush just doing bits as I feel like it.
I've still not sorted the rust issues hopefully I'll do it soon as I've now found a company that makes nearly every panel for an E30!!
-
Callumogy
- E30 Zone Newbie

- Posts: 4
- Joined: Thu Jan 30, 2020 9:49 am
- Location: England (uk)
Here are some pictures. 
You do not have the required permissions to view the files attached to this post.

