Ticking noise at motorway speeds

Moderator: martauto

Post Reply
BeauSpivey
E30 Zone Newbie
E30 Zone Newbie
Posts: 9
Joined: Mon Dec 02, 2019 9:29 am

Thu Jan 23, 2020 3:26 pm

Hi all,

I have a 318i convertible and I noticed a ticking noise at motorway speeds, between 3500 and 4000 rpm. I checked the oil and it was fresh and was a third of the way up between the lines.

Is this just normal for an old car or is there a problem? the car runs fine and pulls very well.

Any help would be appreciated!

Cheers
User avatar
boiliebasher
E30 Zone Regular
E30 Zone Regular
Posts: 269
Joined: Mon Nov 17, 2014 11:00 pm

Thu Jan 23, 2020 5:16 pm

Probably just a noisey tappet. What engine have you got?
If it's an M40, this is unfortunately quite common with these
User avatar
boiliebasher
E30 Zone Regular
E30 Zone Regular
Posts: 269
Joined: Mon Nov 17, 2014 11:00 pm

Thu Jan 23, 2020 5:23 pm

Sorry just realised what subject this is in and saw that it was posted in the M40 section so that answers that.

My M40 engine developed the infamous "M40 tick" and I replaced the camshaft and followers etc and it's still there.

I came to the conclusion that I must have a valve guide that is worn, so it a head off job to cure. So it's on my never ending "to do" list lol.

However what I will say is that if it has only just started do it, it's definitely worth taking off the rocker cover and seeing if that oil spray bar is clear and not blocked up as I believe this was the common cause for it
BeauSpivey
E30 Zone Newbie
E30 Zone Newbie
Posts: 9
Joined: Mon Dec 02, 2019 9:29 am

Fri Jan 24, 2020 4:23 pm

Yes I’ve heard that they suffer with the problem!
Perfect, I’ll think that’s the first thing to check.
Cheers for the help
rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4939
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone
Contact:

Wed Jan 29, 2020 8:28 am

My friend had a clicking noise from his M40 and he recons changing the exhaust gasket solved it. I would be getting the valve train looked at and adjusted though :)
User avatar
boiliebasher
E30 Zone Regular
E30 Zone Regular
Posts: 269
Joined: Mon Nov 17, 2014 11:00 pm

Wed Jan 29, 2020 11:51 am

Not adjustment on m40 engines I'm afraid. Hydraulic tappets on those
rix313
E30 Zone Team Member
E30 Zone Team Member
Posts: 4939
Joined: Fri Oct 31, 2008 11:00 pm
Location: Silverstone
Contact:

Fri Jan 31, 2020 9:26 am

Ah! I wasn't aware.

OP have you had the cam cover off to take a look inside?
User avatar
spannerrash
E30 Zone Newbie
E30 Zone Newbie
Posts: 203
Joined: Tue Feb 04, 2014 11:00 pm
Contact:

Wed Feb 26, 2020 9:47 pm

If you're ballsy, you can give it a start with the cam cover off and see if the bar is feeding all the cam lobes with oil properly: https://www.youtube.com/watch?v=VHRQvqxuIr0#t=6m49s 8)
User avatar
Brianmoooore
E30 Zone Team Member
E30 Zone Team Member
Posts: 49353
Joined: Mon Jan 10, 2005 11:00 pm

Wed Feb 26, 2020 10:54 pm

Get up to the higher end of the speed at which it occurs, then push in the clutch, but feather the throttle to keep the revs the same. Does the noise stop? Immediately turn off the key. Does the noise stop?
Post Reply