Which Country

[martauto]

This has been done many times but I think it`s due an update.....
Which country are you from ??

England x 1

Mart.

[Satan]

London

[ricardo2019]

England

[ah]

For the record England.

[Foe]

South Wales, the bit England is attached to

[Satan]

South Wales, the bit England pays for and uses as a caravan park

[Foe]

South Wales, the bit England pays for and uses as a caravan park

[bab-91]

London

I’ve been in Germany too long. When did London declare it’s independence?

[Satan]

London

I’ve been in Germany too long. When did London declare it’s independence?

Since Boris won you traitor

[Gert_8]

What's this thread for? Little Englanders and the odd weird Pole?

[Satan]

What's this thread for? Little Englanders and the odd weird Asian living in Swansea.......?

[Gert_8]

Never let actual facts get in the way of your posts, Diablo/sexylady/satan/

[steve_k]

i'm currently in the weird bit of the midlands between chesterfield & mansfield AKA no mans land (because no one wants it & i can't blame them).

[Satan]

i'm currently in the weird bit of the midlands between chesterfield & mansfield AKA no mans land (because no one wants it & i can't blame them).

Why?

[steve_k]

i'm currently in the weird bit of the midlands between chesterfield & mansfield AKA no mans land (because no one wants it & i can't blame them).

Why?

Mainly because it's a dump, stuck between the A1 & the M1 & full of ex miners who want it to go back to the "old days"

I've lived in some dumps but this place??
Maybe time to head back to the east coast.

[Satan]

i'm currently in the weird bit of the midlands between chesterfield & mansfield AKA no mans land (because no one wants it & i can't blame them).

Why?

Mainly because it's a dump, stuck between the A1 & the M1 & full of ex miners who want it to go back to the "old days"

I've lived in some dumps but this place??
Maybe time to head back to the east coast.

You mean sticking and demonstrating at Euston station like they did years ago.......?

I am tempted to cash in and move out of London myself down, Devon, Dorset or East Cornwall but they are a funny lot down in Cornwall.......

[bab-91]

Another Londoner moving to Cornwall, I'm sure they will be delighted.
Visited Falmouth for a RN wedding, lovely spot but the property prices are ridiculous.

[Satan]

Another Londoner moving to Cornwall, I'm sure they will be delighted.
Visited Falmouth for a RN wedding, lovely spot but the property prices are ridiculous.

Cheap to be honest in my opinion, what's ridiculous for you BTW?

[bab-91]

Another Londoner moving to Cornwall, I'm sure they will be delighted.
Visited Falmouth for a RN wedding, lovely spot but the property prices are ridiculous.

Cheap to be honest in my opinion, what's ridiculous for you BTW?

3/4 of a mill for a 4 bedroom apartment.

[Cook318IS]

I used to live in Devon, but i've moved to Canada now

[Satan]

Another Londoner moving to Cornwall, I'm sure they will be delighted.
Visited Falmouth for a RN wedding, lovely spot but the property prices are ridiculous.

Cheap to be honest in my opinion, what's ridiculous for you BTW?

3/4 of a mill for a 4 bedroom apartment.

They can all move if they want to as they do moan about not jobs or work in the area, tough luck to be honest, will be doing some work down there helping someone out with a property 150m2 £300k needs complete interior sorting out though and has a building attached to it that can be converted to rentals at a later stage which I may cut a deal and pay for and then earn interest on the load and have somewhere to stay.

¾ M that will be for a new build fully fitted out,

[steve_k]

I used to live in Devon, but i've moved to Canada now

I've seen some of your pictures on FB & the area looks stunning.

[bab-91]

You are full of p!ss & wind, Stefan.

I knew you were frothing at the mouth to talk about your own financial standing.

Obviously the saying, money shouts, wealth whispers will be new to you.

Good luck with your deal.

[Cook318IS]

I used to live in Devon, but i've moved to Canada now

I've seen some of your pictures on FB & the area looks stunning.

Cheers! I have seen you following my page! I have so many winter images I need to upload. It might be todays task to dig them out ready to upload haha. But then i also need to get a job, and i need to continue my studying of the canadian electrical code to sit the exam and hopefully get me equivalent quals!

[Satan]

You are full of p!ss & wind, Stefan.

I knew you were frothing at the mouth to talk about your own financial standing.

Obviously the saying, money shouts, wealth whispers will be new to you.

Good luck with your deal.



What are you on about, all I did was help someone out and I will be doing my side of the work for free, don't be a tosser and a loser all of your life get off your arse and do some work instead of belittling others.

[Satan]

I used to live in Devon, but i've moved to Canada now

I've seen some of your pictures on FB & the area looks stunning.

Cheers! I have seen you following my page! I have so many winter images I need to upload. It might be todays task to dig them out ready to upload haha. But then i also need to get a job, and i need to continue my studying of the canadian electrical code to sit the exam and hopefully get me equivalent quals!

You a sparks as well?

Ex girlfriends brother emigrated to Canada from Poland years back worked in construction insulating buildings externally, now retired cycles to the lake goes fishing (in the summer) and loves the place, seems to have everything only thing is if I was there I'd invest in a Skidoo........

[bab-91]

“Cheap to be honest in my opinion, what's ridiculous for you BTW?“

“They can all move if they want to as they do moan about not jobs or work in the area, tough luck to be honest“.


Careful with the words belittle and tosser,

[Cook318IS]

I've seen some of your pictures on FB & the area looks stunning.

Cheers! I have seen you following my page! I have so many winter images I need to upload. It might be todays task to dig them out ready to upload haha. But then i also need to get a job, and i need to continue my studying of the canadian electrical code to sit the exam and hopefully get me equivalent quals!

You a sparks as well?

Ex girlfriends brother emigrated to Canada from Poland years back worked in construction insulating buildings externally, now retired cycles to the lake goes fishing (in the summer) and loves the place, seems to have everything only thing is if I was there I'd invest in a Skidoo........

To some degree yeah. I haven't done house bashing or anything, but I was an electrical maintenance technician for an aerospace manufacturer. So i'd fix / install a lot of CNC stuff like lathes, mills, borers, grinders, surface finishers, saws, furnaces, EDM machines (the electro discharge type, not the music ), equipment for non destructive testing and so on.

My father in law is the district manager for snowmobile trails out here, so i've had quite a few goes out on the snowmobiles! He's got 2 arctic cat turbos and an N/A 4 stroke one. The turbos are around 170hp, the older of the two had the driveshaft shear and took a lot of the chain case with it. Suspected that a bearing seized in it which kinda sucks! Great fun though when they're working and they're quite a body workout really!

[Satan]

Cheers! I have seen you following my page! I have so many winter images I need to upload. It might be todays task to dig them out ready to upload haha. But then i also need to get a job, and i need to continue my studying of the canadian electrical code to sit the exam and hopefully get me equivalent quals!

You a sparks as well?

Ex girlfriends brother emigrated to Canada from Poland years back worked in construction insulating buildings externally, now retired cycles to the lake goes fishing (in the summer) and loves the place, seems to have everything only thing is if I was there I'd invest in a Skidoo........

To some degree yeah. I haven't done house bashing or anything, but I was an electrical maintenance technician for an aerospace manufacturer. So i'd fix / install a lot of CNC stuff like lathes, mills, borers, grinders, surface finishers, saws, furnaces, EDM machines (the electro discharge type, not the music ), equipment for non destructive testing and so on.

My father in law is the district manager for snowmobile trails out here, so i've had quite a few goes out on the snowmobiles! He's got 2 arctic cat turbos and an N/A 4 stroke one. The turbos are around 170hp, the older of the two had the driveshaft shear and took a lot of the chain case with it. Suspected that a bearing seized in it which kinda sucks! Great fun though when they're working and they're quite a body workout really!

Cool, nice life i was mainly industrial and got out before the building trade collapsed in the UK and moved in other directions.