TPS

Post Mon Jul 01, 2019 9:51 pm

Just serviced the TPS it was full of oil and dirt, i cannot find any information on testing and resetting the correct position. Any information i have found on the Zone and Bentley refer to the 3 pin type mine is a 6 pin round plug. I have so far set it so the micro switch clicks when the throttle is nearly closed does any one have any information on the correct setup, the car is a 1985 325i
Thanks

Post Tue Jul 02, 2019 6:23 pm

that's strange . thought they were all the 3 pin type. what engine managemnet sys have you got then ? L - jetronic

Post Wed Jul 03, 2019 6:55 pm

6 pin TPS is for an auto I believe.

Post Fri Jul 12, 2019 4:25 pm

i got auto and its 3 pin. tps nothing to do with auto .

Post Fri Jul 12, 2019 4:30 pm

can you post a photo of it and its location. might be able to help

Post Fri Jul 12, 2019 7:04 pm

The six pin is for the switchable auto, I believe.

Ben