is there anyone who can help as there is no listing for m51 conversion on the zone .
My first conversion but wires are my biggest downfall.
Thanks
M51 conversion (help!!)
Moderator: martauto
Hi guys . I’m really close to finishing my conversion but having serious issues with wiring , injection pumps and Ecu ..
is there anyone who can help as there is no listing for m51 conversion on the zone .
My first conversion but wires are my biggest downfall.
Thanks
is there anyone who can help as there is no listing for m51 conversion on the zone .
My first conversion but wires are my biggest downfall.
Thanks
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
https://www.jamesfawcett.co.uk/m51-tds- ... e30-notes/ Any help?
M51 was around for a number of years. What did yours come from?
M51 was around for a number of years. What did yours come from?
Mines was from an e34 Tds M regBrianmoooore wrote: ↑Sun Apr 07, 2019 12:23 amhttps://www.jamesfawcett.co.uk/m51-tds- ... e30-notes/ Any help?
M51 was around for a number of years. What did yours come from?
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49358
- Joined: Mon Jan 10, 2005 11:00 pm
I'm someone who considers diesel to be the fuel of the devil, so have little experience with cars powered by said fuel, but the E34 was, like the E30, a BMW design that had the engine wiring loom completely separated from the rest of the body looms, so I would expect the wiring to be essentially the same as fitting a M50 into an E30 - battery + (red), battery - (brown and/or brown/orange) and then blackyellow (start), green (ignition), and green/purple (pump) in the C101, plus the single EWS wire.