Hi All!
Has anyone on here changed over to a larger 25mm master cylinder? If so which one are you using?
Ta!
25mm Brake master cylinder
Moderator: martauto
-
paultv
- E30 Zone Squatter
- Posts: 1545
- Joined: Mon Apr 21, 2014 11:00 pm
- Location: Auf dem Schnee: Germany
I think you'll find the 750i E32 25mm MC is for an ABS system, so it only has front and rear out to the ABS unit which then has 3 outputs, LR front and a common rear output.
Word is you add a T piece to split the fronts on a non ABS set up.
This will give you a firmer pedal - but lower your braking power for the same input "push" - depends how strong your leg is! all because of the reduced mechanical advantage of the original 19mm or 22mm bore
on the stock MC.
Paul
Word is you add a T piece to split the fronts on a non ABS set up.
This will give you a firmer pedal - but lower your braking power for the same input "push" - depends how strong your leg is! all because of the reduced mechanical advantage of the original 19mm or 22mm bore
on the stock MC.
Paul
4th May 1990 325i Convertible.
BMW E30 Cabriolet Best Mod Ever:
https://bmwe30cabriolet-wdm.blogspot.com/
BMW E30 Cabriolet Best Mod Ever:
https://bmwe30cabriolet-wdm.blogspot.com/