Hi I am wanting to do a 5 stud conversion on my E30s
I am looking to purchase the below from Ebay. The seller says all I need is e36 m3 control arms and the rest is bolt on. Is this right? Any advice much appreciated. Thanks in advance!
https://www.ebay.co.uk/itm/283102355685
E30 5 stud conversion
Moderator: martauto
-
akalair
- E30 Zone Newbie

- Posts: 127
- Joined: Thu Aug 31, 2017 11:00 pm
Last edited by akalair on Thu Aug 23, 2018 9:40 pm, edited 1 time in total.
-
martauto
- E30 Zone Team Member

- Posts: 6207
- Joined: Wed Aug 31, 2005 11:00 pm
- Location: leeds
Possibly more wheel choice ?
Mart.
Mart.
Only the E46 cab left now.
Just got too old.
Just got too old.
-
akalair
- E30 Zone Newbie

- Posts: 127
- Joined: Thu Aug 31, 2017 11:00 pm
Yeah more wheel choice and possible m3 conversion. What do you guys think...parts in Ebay as any good?
Thanks
Thanks
-
martauto
- E30 Zone Team Member

- Posts: 6207
- Joined: Wed Aug 31, 2005 11:00 pm
- Location: leeds
The parts on e-bay look knackered. You may be ok with the rear conversion, the front is not straight forward as the caster/camber issues raise their head.
Put a wanted add out for these and pm some guys on here like Dan the, Magpie, sweep, brutus to name a few as these guys could tell and sell you all you wish to know.
Or have a look in the "wiki".
Mart.
Put a wanted add out for these and pm some guys on here like Dan the, Magpie, sweep, brutus to name a few as these guys could tell and sell you all you wish to know.
Or have a look in the "wiki".
Mart.
Only the E46 cab left now.
Just got too old.
Just got too old.
-
jerseytim
- E30 Zone Newbie

- Posts: 59
- Joined: Sun Nov 12, 2017 11:00 pm
i used these spacers that let you use the 5 stud hub on the e30 leg so the geometry is still ok and i used a compact 318ti beam on the rear
-
akalair
- E30 Zone Newbie

- Posts: 127
- Joined: Thu Aug 31, 2017 11:00 pm
Thanks all,
have sent messages to the above. Lets see what comes back
have sent messages to the above. Lets see what comes back
