Best p[lace to get slave and master cylinders

[aimlessrock]

as above- am looking to replace both on mine.

are ECP or Carparts4less ok to use or am I better off going to the the dealers?

[Brianmoooore]

autodoc is where I'd look these days. Generally cheaper than ECP/CP4L, but plus carriage.
Site is .co.uk, but the parts are supplied from Germany.
For most parts you have a wide selection of manufacturers to suit the depth of your pocket.

[martauto]

autodoc is where I'd look these days. Generally cheaper than ECP/CP4L, but plus carriage.
Site is .co.uk, but the parts are supplied from Germany.
For most parts you have a wide selection of manufacturers to suit the depth of your pocket.

I`ve had a fair bit of stuff from here as well with no complaints.

Mart.

[Contours]

Have had great service from Mister Auto over many years. Good cataloguing of parts and easy to identify the right one for one's car. Free shipping over 35 pounds I think and just checking now, I see they are 4 pounds cheaper than Autodoc for a Febi slave cylinder. I am converting roughly from Euros but worth having a look as they are also very reliable.

[martauto]

Have had great service from Mister Auto over many years. Good cataloguing of parts and easy to identify the right one for one's car. Free shipping over 35 pounds I think and just checking now, I see they are 4 pounds cheaper than Autodoc for a Febi slave cylinder. I am converting roughly from Euros but worth having a look as they are also very reliable.

Have you a link for this please?

Mart.

[Contours]

http://www.mister-auto.com/

There it is.

[Brianmoooore]

http://www.mister-auto.co.uk/en/

This one's better!

[Bonymaenjack]

I use German Swedish & French , the stock decent branded names and they do have some fantastic deals at least once a week . 50-60% off

[aimlessrock]

perhaps we need a section on the zone for good parts suppliers- esp any good prices or offers etc.