Consolidated E30 Dismantling Thread - 316i to 325i Sport & M3...
Moderator: martauto
-
LDSWeller
- E30 Zone Newbie

- Posts: 7
- Joined: Fri Sep 02, 2016 11:00 pm
Hi, looking for a few items and just asking if you have any.
- Red e30 facelift coupe doors
- Red front valance
- Black headlining with sunroof part as well
- Rear lights
- Front Colour coded bumper with no cracks
- Colour coded mirrors (good quality)
Cheers, Luke
- Red e30 facelift coupe doors
- Red front valance
- Black headlining with sunroof part as well
- Rear lights
- Front Colour coded bumper with no cracks
- Colour coded mirrors (good quality)
Cheers, Luke
-
marvelos
- E30 Zone Newbie

- Posts: 82
- Joined: Sun Sep 04, 2005 11:00 pm
Hi there do you have a heater blower?
-
marvelos
- E30 Zone Newbie

- Posts: 82
- Joined: Sun Sep 04, 2005 11:00 pm
How much for the blower posted?
-
Nickerz
- E30 Zone Newbie

- Posts: 223
- Joined: Sun Jan 25, 2009 11:00 pm
- Location: Reading
Do you have a passenger rear tech 2 quarter pod for 2 door?
-
Jona1971
- E30 Zone Regular

- Posts: 474
- Joined: Sat Mar 15, 2014 11:00 pm
- Location: Staffordshire Moorlands
Hi,
I need a gear lever and gear knob for a m20b25 please, manual.
I need a gear lever and gear knob for a m20b25 please, manual.
Moredoor autos with small engines are cool - but my new m20b25 is awesome!
-
marvelos
- E30 Zone Newbie

- Posts: 82
- Joined: Sun Sep 04, 2005 11:00 pm
Hi guys I'm looking for pre face lift bumpers.. You still have the 1s on the white alpina?
-
nick496
- E30 Zone Newbie

- Posts: 9
- Joined: Wed Oct 28, 2015 11:00 pm
Got a complete headlight washer system?
-
daviekiwi
- E30 Zone Newbie

- Posts: 49
- Joined: Sat Oct 11, 2014 11:00 pm
hi i'm looking for floor pan cut out sections for 1987 2dr 325 pre face lift.
for n/s front and rear?
for n/s front and rear?
-
Tedswagon
- E30 Zone Addict

- Posts: 2195
- Joined: Sun Nov 23, 2008 11:00 pm
- Location: Edinburgh
E30 316i auto coupe build thread here viewtopic.php?f=25&t=273035
-
Milo2009
- E30 Zone Newbie

- Posts: 5
- Joined: Wed Oct 25, 2017 11:00 pm
Hi do you have front wings for a cab, posted to Cornwall ??
-
Milo2009
- E30 Zone Newbie

- Posts: 5
- Joined: Wed Oct 25, 2017 11:00 pm
Hi do you have front wings for a cab, posted to Cornwall ??
-
Aaronmclaren
- E30 Zone Newbie

- Posts: 4
- Joined: Thu Jan 23, 2014 11:00 pm
- Location: Cardiff
Hi do you have a complete rear anti roll bar set mines is a 89 e30 2.0l coupe
-
sskoda
Sure do, responded in your wanted ad already.Aaronmclaren wrote:Hi do you have a complete rear anti roll bar set mines is a 89 e30 2.0l coupe
Thanks
-
liquid079
- E30 Zone Regular

- Posts: 368
- Joined: Tue May 03, 2005 11:00 pm
- Location: The rolling hills of South Somerset
Hi.
Do you have any 885 cylinder heads(2.5 M20) available at the mo?
Cheers, Dan.
Do you have any 885 cylinder heads(2.5 M20) available at the mo?
Cheers, Dan.
-
alexm3uk
- E30 Zone Regular

- Posts: 361
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: orpington,kent
need a lenght of wires for the electric windows with the connectors on for the switches
-
alexm3uk
- E30 Zone Regular

- Posts: 361
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: orpington,kent
front 2 sets think its 10 wires in all with the spade like connectors on the end to connect to switch
just need the wires if you have them please
just need the wires if you have them please
-
sskoda
They connect via a connector block, not individual spade terminals. You're not looking the block, if I read right, you just want wires? That's way more labour-intensive than it's worth.
-
Brianmoooore
- E30 Zone Team Member

- Posts: 49359
- Joined: Mon Jan 10, 2005 11:00 pm
I've come across dealer fitted front electric windows, where the switches were connected by individual spade connectors. Switches and window mechs. were far inferior in quality to the BMW OE equivalents.sskoda wrote:They connect via a connector block, not individual spade terminals. You're not looking the block, if I read right, you just want wires? That's way more labour-intensive than it's worth.
-
alexm3uk
- E30 Zone Regular

- Posts: 361
- Joined: Sat Jul 23, 2005 11:00 pm
- Location: orpington,kent
ok mate not problem i have the blocks but the wires had broke so did only need the wires but understand its more labour intensive than its worthsskoda wrote:They connect via a connector block, not individual spade terminals. You're not looking the block, if I read right, you just want wires? That's way more labour-intensive than it's worth.
i have actually fixed it now so not a problem thank you
-
Russp92
- E30 Zone Newbie

- Posts: 48
- Joined: Fri Mar 28, 2014 11:00 pm
Hi do you have a set of e35 535i m30 downpipes for sale
-
knobstar
- E30 Zone Newbie

- Posts: 49
- Joined: Fri Aug 01, 2008 11:00 pm
Hi
Do you have an e30 m42 exhaust manifold?
Thanks
Matt
Do you have an e30 m42 exhaust manifold?
Thanks
Matt
-
andye30nut
- E30Zone Contributor
- Posts: 622
- Joined: Mon Apr 16, 2007 11:00 pm
- Location: Airdrie
Tech 1 rear valance?
-
B5234FT
- E30 Zone Newbie

- Posts: 87
- Joined: Sun Jul 16, 2017 11:00 pm
Hi, I'm looking for prices for:
Fuel pump and sender unit
Manual pedal box assembly
Gear gaiter frame
Black coupe doorcards
Rear trailing arms with ABS bosses
If you have any of them please let me know.
Thanks
Al
Fuel pump and sender unit
Manual pedal box assembly
Gear gaiter frame
Black coupe doorcards
Rear trailing arms with ABS bosses
If you have any of them please let me know.
Thanks
Al



