Megasquirt issues (maybe one for gunni, fowler, ant)

Discuss general engine, turbo and supercharger conversions in this section

Moderator: martauto

Post Reply
cypriot_boy_2k7
E30 Zone Squatter
E30 Zone Squatter
Posts: 1641
Joined: Mon Jan 29, 2007 11:00 pm
Contact:

Wed Oct 18, 2017 11:42 am

Been a while since I have been on the forum, My turbo project has been off the road for a while now, I have few bits done, now I'm ready to start it up. Had to get another megasquirt, all built and tested.

I have installed
New injectors part no. 0280155968 42lbs High impedance.

originally I had chu346's low impedance 0280150804

In tunerstudio these were set up as high impedance 8O.

Been wanting to do a dead time calculation but seen as I have ms1 I don't have the option, my new injectors are flooding the engine, getting a lot of backfire and no start.
My req_fuel is calculated in tunerstudio as 6.1ms for the 42lbs whereas the old injectors were set at 7.2ms and was running fine.

Also went wasted spark as per Gunnis post in another thread with this coil pack
http://cgi.ebay.co.uk/Vauxhall-ASTRA-OM ... ms=65%3A12

Image

Correct me if I'm wrong, top 2 banks closest to the plug are cylinders 1 + 3 and bottom banks are 2 + 4
cypriot_boy_2k7
E30 Zone Squatter
E30 Zone Squatter
Posts: 1641
Joined: Mon Jan 29, 2007 11:00 pm
Contact:

Wed Nov 15, 2017 2:56 pm

bump
Post Reply