Hi Gents,
Finally sorting the rust on the rear end of my e30. Rear boot lock and passenger side 3/4 are fully holed so im replacing with genuine panels.
Ive long since preferred the prefacelift rear lights and the look of the rear end. Ive been thinking i could replace the rear 3/4 panels and boot lock panel with pre facelift parts? I would be doing the wheel arch inners anyway so could do the lot in one.
I know id obvously be making more work for myself but i think it would scratch my itch for an early car rather than changing mine.
Thoughts/recomendations welcome.
Cheers,
Matt
Rear end conversion
Moderator: martauto
- randomspeedfreak
- E30 Zone Regular
- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
-
- Old Skooler
- Posts: 14020
- Joined: Tue Feb 14, 2006 11:00 pm
- Location: Canterbury
Yes you could - it has been done before, though usually the other way round! Bear in mind that the distance from the top of the rear tyre to the wheelarch differs by about an inch or so (wheelarch sits a bit lower on the facelift cars).
///M aurice
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
ECU Upgrade EPROM Chips, £40 posted within the UK. Note these are not Zone chips.
viewtopic.php?f=6&t=279421
- randomspeedfreak
- E30 Zone Regular
- Posts: 992
- Joined: Mon Mar 15, 2010 11:00 pm
- Location: Bristol
ok, i think ill leave it then
Cheers Gents
Cheers Gents