Hi ,In the process of upgrading my brake setup,I have purchased the capilers and have the adaptor bracket made up,
I was ordering a set of disc's the morning ,The G60 corrado one's, the guy at the shop reckons there are 5 hole,
Do any of you have any more knowledge of this or a part number if possible
Cheer's Mo
Rx7 brake upgrade
Moderator: martauto
-
MattTheHat325
- E30 Zone Regular
- Posts: 727
- Joined: Mon Aug 10, 2009 11:00 pm
- Location: gloucestershire
I haven't done the brake swap myself but I'm pretty sure the G60 ones are 4x100, it's the VR6 which uses 5x100. Maybe your parts guy is getting his wires crossed
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
MattTheHat325 wrote:I haven't done the brake swap myself but I'm pretty sure the G60 ones are 4x100, it's the VR6 which uses 5x100. Maybe your parts guy is getting his wires crossed
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
magpie
- Old Skooler
- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
monoon
- E30 Zone Newbie
- Posts: 43
- Joined: Thu Jan 15, 2009 11:00 pm
Many thanks for the reply's,
Will hopefully get a few pic's of the project on here soon
Cheers's Mo
Will hopefully get a few pic's of the project on here soon
Cheers's Mo