M50 tubular exhaust manifold
Moderator: martauto
-
DanThe
- E30 Zone Team Member
- Posts: 28649
- Joined: Sat Sep 10, 2005 11:00 pm
- Location: Staffs
Where do I find one of these? Were they fitted to any M50's or are they pureley a 2.8 item? I really dont fancy chopping at a cast manifold
-
Brianmoooore
- E30 Zone Team Member
- Posts: 49360
- Joined: Mon Jan 10, 2005 11:00 pm
From what I've seen in the breakers' yards, the tubular manifolds started with the M52s onwards.
On my own M50, I used an unmodified front E36 cast manifold, and a rear one with the section between where the three pipes join and the flange removed.
Done by a professional welder in return for finding an electrical fault in his workshop.
On my own M50, I used an unmodified front E36 cast manifold, and a rear one with the section between where the three pipes join and the flange removed.
Done by a professional welder in return for finding an electrical fault in his workshop.