325i SE Two Door 1989 Handling Upgrade

Need technical Q/A then you're in the right place

Moderator: martauto

User avatar
Bendo
E30 Zone Newbie
E30 Zone Newbie
Posts: 3
Joined: Sat Jul 23, 2016 11:00 pm

Post Sun Jul 24, 2016 5:59 pm

I have had a standard e30 325i SE two door for about 10 years and in this time not used it much (done about 10k miles in it!). However, I am looking to use it more now and upgrade it a bit.

It is fully standard, two owners including me and done about 100,000 miles.

I would like to upgrade the handling. My aim would be a sportier feel but not over the top, not rock hard, and much better grip. I don't have a maximum budget and would like to do a proper job. My prioritry is on much better and more enjoyable handling. I want to keep the car standard looking and so lowering it, differenty wheels, etc is not a priority for me.

She runs standard BMW 15 inch BBS alloys.

Bascially the suspension will need a good overhall and decent, functional, upgrade.

Thanks in advance![/url]
User avatar
Bendo
E30 Zone Newbie
E30 Zone Newbie
Posts: 3
Joined: Sat Jul 23, 2016 11:00 pm

Post Sun Jul 24, 2016 6:01 pm

Here is a pic for you guys to see :))

User avatar
aimlessrock
E30 Zone Squatter
E30 Zone Squatter
Posts: 1821
Joined: Sun Dec 06, 2009 11:00 pm
Location: Manchester

Post Thu Jul 28, 2016 8:48 am

a full suspension overhaul would be a great start, worn/knackered suspension ruins the ride of an E30. Poly bushes can be used for the ARB's but personally I would use oem rubbers for the rest to avoid a hard ride.

The wiki has a couple of excellent article to guide you.
E30 320i Convertible (1989)
190 Mercedes (1988)

"there is nothing more expensive than a cheap E30"
User avatar
Bendo
E30 Zone Newbie
E30 Zone Newbie
Posts: 3
Joined: Sat Jul 23, 2016 11:00 pm

Post Tue Aug 02, 2016 8:15 pm

Great, thanks for your thoughts.