Ignition switch Unknown white plug Grey and Grey/Brown Wire

[JoshH]

Hi all

My ignition switch had died so I'm fitting a push start and ignition switch I had kicking about in the garage. The car is a track car anyway.

I have the majority of the wiring sussed but I'm slightly stumped by the small white connector with a grey and a grey/brown stripe wire.

I've done some searching about and can't find info on it, it's not mentioned on the wiring diagrams I have found so just wondering if I can leave it disconnected if it's something like the radio on signal for key pos 1?

Here is the little plug


Thanks in advance

[Brianmoooore]

Part of the parking light circuit, activated by the indicator switch.

[Buis]

Indees. Mostly not on USA spec cars

[JoshH]

Ah ok thanks both. Non essential then even for mot.

I will reconnect anyway though. As it was inside the ignition switch wiring cover I assumed it was wired to the switch also

[Brianmoooore]

It is wired to part of the ignition switch. Closed in position '0', and open in positions '1','2' and '3'.