S50 help
Moderator: martauto
-
Siggo
- E30 Zone Newbie

- Posts: 123
- Joined: Sat Sep 29, 2012 11:00 pm
Hi. Just swapped s50 engine in over my 2.8 with upgrades chip and manifold.im not that impressed . I prefer the 2.8 any idears why it's not as quick as people are telling me . Car run's fine many thanks
-
m3dtm
- E30 Zone Newbie

- Posts: 65
- Joined: Fri Jan 08, 2016 11:00 pm
Difficult to say from behind a laptop. But the 2.8 has a different character producing it's torque from low down, where as the S50 needs to be revved to unleash it's potential. That might be what you are experincing, unless the S50 you have is not very healthy.
John
John
-
irish320i
- E30 Zone Regular

- Posts: 431
- Joined: Wed Jun 29, 2005 11:00 pm
- Location: Co. Monaghan, Ireland
What exhaust manifold are you running, any chance the ports are not matched
Al
89 316i s50b30, 00 subaru imperza turbo(gone) 2005 range rover td6,
89 316i s50b30, 00 subaru imperza turbo(gone) 2005 range rover td6,
-
M3Pete
- E30 Zone Newbie

- Posts: 87
- Joined: Mon Aug 11, 2014 11:00 pm
The S50 produces more torque from idle to redline than a 2.8 ever could. The fact people say you need to rev it to get the potential is simply ridiculous.
If it doesn't feel as quick as a 2.8 then there is obviously something wrong! many are quite tired, and need vanos seals, valve adjustment, and new MAF sensors among things like air leaks, ccv problems and throttle body balancing. First thing I would do is check for fault codes then go from there.
If it doesn't feel as quick as a 2.8 then there is obviously something wrong! many are quite tired, and need vanos seals, valve adjustment, and new MAF sensors among things like air leaks, ccv problems and throttle body balancing. First thing I would do is check for fault codes then go from there.
-
jmc330i
- Engaged to the E30 Zone

- Posts: 6621
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Somerset
As above, first get the fault codes read (fix issues and clear codes if needs be) and get the adaptions cleared. Clearing the adaptions on mine made it a different car.
James
'91 325i Sport
'93 318i touring 16v
'91 325i Sport
'93 318i touring 16v
-
_Dan_
- E30 Zone Newbie

- Posts: 135
- Joined: Sun Jun 07, 2015 11:00 pm
Where you getting this info from ? The 2.8 is clearly a better engine!M3Pete wrote:The S50 produces more torque from idle to redline than a 2.8 ever could.
-
maggspower
- Turbo Farmer Tractor Driver
- Posts: 2376
- Joined: Wed Oct 12, 2005 11:00 pm
- Location: Nowhere near South Wales, ok butt
The difference between a good s50 and a not so good one is huge. Like M3pete says, fix the things that are wrong with it. And I would start with the vanos seals and associated gubbins.
Contact: theengineshedonline@gmail.com
-
Siggo
- E30 Zone Newbie

- Posts: 123
- Joined: Sat Sep 29, 2012 11:00 pm
Thank s a lot guys will do that .
-
ajay
- E30 Zone Camper

- Posts: 1041
- Joined: Fri Nov 24, 2006 11:00 pm
I woud start with reading the fault codes first.
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
s50 300 bhp v m52 + m50 inlet est 225 bhp >>>
Houston !
Houston !

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
Siggo
- E30 Zone Newbie

- Posts: 123
- Joined: Sat Sep 29, 2012 11:00 pm
As far as I know no fault codes. Will check again soon tho. Car runs fine just thought it would be a lot quicker as it got 70 if not more horse power more.
-
_Dan_
- E30 Zone Newbie

- Posts: 135
- Joined: Sun Jun 07, 2015 11:00 pm
What diff /box you running ?
Emerald standalone, engine builds + e30 repairs - TheEngineShedOnline@gmail.com
-
ajay
- E30 Zone Camper

- Posts: 1041
- Joined: Fri Nov 24, 2006 11:00 pm
Siggo wrote:As far as I know no fault codes. Will check again soon tho. Car runs fine just thought it would be a lot quicker as it got 70 if not more horse power more.
A few years back i done an S50 conversion,at first when i drove it it was in limp mode around 70bhp down but still out paced the M52's around at the time! Something's not right for sure.
-
magpie
- Old Skooler

- Posts: 28035
- Joined: Sun Jun 29, 2008 11:00 pm
- Location: Consett,Durham.
m52 b30 stroker ftw 

m52 b30 stroker 6-speed 318is Galvanizer
m42 touring
+ a yard full of scrap turds
-
ajay
- E30 Zone Camper

- Posts: 1041
- Joined: Fri Nov 24, 2006 11:00 pm
M52 b30's are wicked, as we all know capable of great power, great torque and make great sense too! But an 8K red line & fly by wire throttle with sport button on a well sorted S54 is more of a thrill. a˜€
-
brian_s
- E30 Zone Newbie

- Posts: 158
- Joined: Thu Jun 26, 2008 11:00 pm
Oooh yes the s54 is some motor, ok it's not the quickest, I've had quicker jap crap motors but all round for the cash a e46 m3 is a nice place to be for a good all rounderajay wrote:M52 b30's are wicked, as we all know capable of great power, great torque and make great sense too! But an 8K red line & fly by wire throttle with sport button on a well sorted S54 is more of a thrill. a˜€
-
maggspower
- Turbo Farmer Tractor Driver
- Posts: 2376
- Joined: Wed Oct 12, 2005 11:00 pm
- Location: Nowhere near South Wales, ok butt
Much better if you do an e30 shell conversion on it thoughbrian_s wrote:Oooh yes the s54 is some motor, ok it's not the quickest, I've had quicker jap crap motors but all round for the cash a e46 m3 is a nice place to be for a good all rounderajay wrote:M52 b30's are wicked, as we all know capable of great power, great torque and make great sense too! But an 8K red line & fly by wire throttle with sport button on a well sorted S54 is more of a thrill. a˜€
I'm sure all the quicker "Jap crap" would have had a little something something bolted to the exhaust manifold, besides theres more to it than the numbers or how quick it goes
Contact: theengineshedonline@gmail.com
-
Siggo
- E30 Zone Newbie

- Posts: 123
- Joined: Sat Sep 29, 2012 11:00 pm
Gearbox from the 2.8 diff not sure .that s what I was going change next was the diff have a 391 LSD but research saying 315 .will be going right through the car when it goes back in
-
Siggo
- E30 Zone Newbie

- Posts: 123
- Joined: Sat Sep 29, 2012 11:00 pm
Just met a guy who seems to think there should be a engine management wire going to the dash and that's why it's not as quick as it's not telling the engine .i have no engine mangement light that comes on dash on start up. Is this true thanks
