Illuminated gear knob wiring connector plug?

Post Fri Oct 16, 2015 6:18 pm

Hi all

I purchased a new illuminated gear knob a few years ago for the m3 and I had to make a new wiring loom on the car as a previous owner had removed the female plug and wires. At the moment I have just pushed in a bullet connector on both terminals as I do not want to cut the original plug off.

I have looked online but not drawn up much info but does anyone know the part numbers for the female loom plug and the 2 pins? So that I can finish this job correctly. Failing that I was thinking of
Splicing into my loom and fitting a 2 pin connector like a optimate plug or something similair to the orignal bmw plug.

I looked online and This is what I need, The loom for this is in the USA $39.00
https://c1552172.ssl.cf0.rackcdn.com/454685_x800.jpg

I was hoping to get the plug and pins for a few quid from bmw if I have part numbers?

Leigh

Post Fri Oct 16, 2015 6:23 pm

Is it not number 4 on here

http://www.realoem.com/bmw/enUS/showpar ... Id=25_0102

Post Fri Oct 16, 2015 6:32 pm

alexm3uk wrote:Is it not number 4 on here

http://www.realoem.com/bmw/enUS/showpar ... Id=25_0102

Same as this
https://www.ecstuning.com/BMW-E30-M3-S1 ... /ES159276/

and
https://shop.bmw-classic.com/is-bin/INT ... AUTOMOBILE

Yes That would be the whole loom, I was hoping to get the plug and pins only as being a cheap ass,

Well I might as well phone BMW tomorrow and get a price for it but I recon its going to be silly money, Pretty sure I asked before and they were NLA.

Leigh

Post Fri Oct 16, 2015 6:38 pm

Knowing BMW it's going to the whole part and it is available mate on there website a˜€a˜€a˜€ 32 euro plus the p&p

Post Mon Oct 19, 2015 4:19 pm

£31.17 + vat from local bmw dealer

Post Mon Oct 19, 2015 5:31 pm

http://www.e30zone.net/e30zonewiki/imag ... _lever.pdf

Post Mon Oct 19, 2015 6:57 pm

Cheers Brian

Leigh