Just wondered if anyone has any pics of the sump baffle mod? Just need to work out exactly were to get it welded. I have the sump,dip, and pick up off think it was a 5 series carnt really remember now it's been 2-3 years since I bought my e30 and s50b30 I have most bits just trying to refresh my memory on the conversion again.
Any help will be apretiated thanks
Lee
Sump baffle pics anyone?
Moderator: martauto
-
badger88
- E30 Zone Newbie

- Posts: 33
- Joined: Fri May 28, 2010 11:00 pm
- Location: birmingham
"IF It's not right it's wrong"
-
ajay
- E30 Zone Camper

- Posts: 1041
- Joined: Fri Nov 24, 2006 11:00 pm
A loose decription would be towards the back of the sump bowl, past the pick up but with a gap before you hit the back of the bowl so the oil coming back to the bowl can get back in, obviously the exact point of instalation will not foul the crank when its spinning, if you wait a couple months id probably sell mine,( going back to S54 pump & sump).
-
badger88
- E30 Zone Newbie

- Posts: 33
- Joined: Fri May 28, 2010 11:00 pm
- Location: birmingham
Ok Thanks jay
"IF It's not right it's wrong"
-
ergencal
- E30 Zone Newbie

- Posts: 1
- Joined: Mon Oct 26, 2015 11:00 pm
- Location: Wickham
Hi Lee, where are you based? You want to make sure that you place the baffle to keep as much oil at the area of pick up when under hard acceleration. Any welding you want doing i can help with, i work for Ergen Motorsport we do this on the daily!
-
badger88
- E30 Zone Newbie

- Posts: 33
- Joined: Fri May 28, 2010 11:00 pm
- Location: birmingham
Hi mate thanks for your reply I'm in Birmingham where abouts are you? I'm ready to get this done now pm me your number and a price on what you would charge to do this for me! I could post the sump if you are too far
Cheers lee
Sorry for the late reply
Cheers lee
Sorry for the late reply
"IF It's not right it's wrong"
