noisy tappets help needed!

Need technical Q/A then you're in the right place

Moderator: martauto

Post Reply
User avatar
Bazo187
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Sat Jan 26, 2013 11:00 pm
Location: Blackburn

Sun Aug 16, 2015 6:03 pm

318i cab m40 with 127 on clock.

Had my car for 7 years now started ticking bad. Give it an engine flush new oli and
Tappet cleaner.

Helped abit but not much what's the best bet from this point?
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Sun Aug 16, 2015 8:12 pm

Will it rev above 4500rpm under load?
Youth is wasted on the young.
User avatar
Bazo187
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Sat Jan 26, 2013 11:00 pm
Location: Blackburn

Sun Aug 16, 2015 9:35 pm

Yeah drives bang on when warm
User avatar
Bazo187
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Sat Jan 26, 2013 11:00 pm
Location: Blackburn

Mon Aug 17, 2015 1:44 am

Still sounds abit tappety, but pulls like normal.
daimlerman
**BANNED**
Posts: 15968
Joined: Mon Feb 27, 2006 11:00 pm
Location: Grumpy Old Man

Mon Aug 17, 2015 7:46 am

So the cam is not badly worn,could be that the lifters are draining oil and until they have re-filled themselves the valve gear will rattle a bit.
Youth is wasted on the young.
User avatar
Bazo187
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Sat Jan 26, 2013 11:00 pm
Location: Blackburn

Mon Aug 17, 2015 10:34 am

Need to get the timeing belt done, and I wana keep the car.

Do you reckon I should get a cam kit and oil spray bar change them all at the same time.

If so any recommendations on where the best place to get all the bits would be.
User avatar
Bazo187
E30 Zone Newbie
E30 Zone Newbie
Posts: 71
Joined: Sat Jan 26, 2013 11:00 pm
Location: Blackburn

Mon Aug 17, 2015 10:35 am

Need to get the timeing belt done, and I wana keep the car.

Do you reckon I should get a cam kit and oil spray bar change them all at the same time.

If so any recommendations on where the best place to get all the bits would be.
Post Reply