does anyone know if the exhaust rear box mounts (the part that is attached to the car) are bolt on as i seem to have lost one.
the strap is still round the back box with the rubber ring attached
but the hanger has gone
http://www.realoem.com/bmw/showparts.do ... g=18&fg=20
Exhaust mounts
Moderator: martauto
-
woodysjw
- E30 Zone Regular
- Posts: 481
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Harwich, Essex, Drives: Motorsport Cab
796 - 1989 Motorsport Edition
-
Ant
- Retired Team Member
- Posts: 10496
- Joined: Tue Dec 21, 2004 11:00 pm
- Location: PD+E dept :D
welded to the structure M8
get anopther back box band and use that to repair the missing hanger on the car, welding is best but it is possble to nut and bolt assumin theres some of the original bracket to bolt too
HTH
get anopther back box band and use that to repair the missing hanger on the car, welding is best but it is possble to nut and bolt assumin theres some of the original bracket to bolt too
HTH
Product Development and Endurance for Delphi.
Original performance chips, original works not unlicensed copies
Email FTW
Original performance chips, original works not unlicensed copies
Email FTW-
woodysjw
- E30 Zone Regular
- Posts: 481
- Joined: Fri Jan 14, 2005 11:00 pm
- Location: Harwich, Essex, Drives: Motorsport Cab
Its the one just behind the passenger rear wheel,
I cant see any remains cant even tell where it was.
all looks clean enough in there I try and give it a good wash out down
there as much as u can.
I cant see any remains cant even tell where it was.
all looks clean enough in there I try and give it a good wash out down
there as much as u can.
796 - 1989 Motorsport Edition
-
A1BMW325iSport
- E30 Zone Addict
- Posts: 4239
- Joined: Mon Jan 10, 2005 11:00 pm
- Location: Mid Wales
i ordered mine from bmw and welded it on
-
oze30
- E30 Zone Addict
- Posts: 4133
- Joined: Mon Oct 24, 2005 11:00 pm
- Location: Sydney
there's another 2 hangers you can use, one in the middle and another towards the ass end of the car