Just wondered what mounts people are using for track/ hard use cars.
Im building a 325 tarmac rally car and would like to upgrade from the original rubber mounts. I have seen a few poly type mounts on the net but wondered what tried and tested routes there are?
engine mounts
Moderator: martauto
-
Marneus
- E30 Zone Newbie
- Posts: 83
- Joined: Wed Nov 25, 2009 11:00 pm
The revshift ones from hack engineering look good quality & there are plenty of US e30's running them. They come in different hardness compounds too.
-
bosers
- E30 Zone Regular
- Posts: 496
- Joined: Sat Jun 29, 2013 11:00 pm
- Location: Devon
They are great mounts, cheaper direct from revshift though. (sorry Hack)
-
fastdave
- E30 Zone Newbie
- Posts: 146
- Joined: Thu Nov 10, 2005 11:00 pm
Phil littleworth on facebook can get all the bits you need he helped develop the bmw challenge kit !
-
Sjon
- E30 Zone Newbie
- Posts: 5
- Joined: Thu Apr 16, 2015 11:00 pm
- Location: Monster (NL)
PTFE / Teflon
60mm diameter
40 mm high
9,8mm hole
Works brilliant here
good luck!
60mm diameter
40 mm high
9,8mm hole
Works brilliant here
good luck!
-
Norbert
- E30 Zone Newbie
- Posts: 7
- Joined: Sun Jan 19, 2014 11:00 pm
I am using Teflon mounts from netherlands based company hartmann motorsport. Live the rigidity it gives in corners and the smoothness of gearshifts after installing it is delight! Cant say lost alot of comfort... In any case "because racecar". Using it for daily commute.
-
reggid
- E30 Zone Squatter
- Posts: 1983
- Joined: Mon Jul 11, 2005 11:00 pm
- Location: Oz
for something a little better the stock, OE early m30 mounts are a slight upgrade
E30 325is with M20B31