325i Sport black - MTech1 - Now for sale (again) !!
Moderator: martauto
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
What did you do to alter that, Jimbo?

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
87mtech27
- E30 Zone Camper

- Posts: 1429
- Joined: Mon Feb 02, 2009 11:00 pm
Never seen that before. Is it strong enough to withstand harsh British roads?
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
I presume that is a temp fix, rather than changing the damper and springs for the moment?

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Yes, they are very strong, i've had them on another car for over a year with no issues
but yer, it a temp job until i can afford/find a set of genuine mtech springs
but yer, it a temp job until i can afford/find a set of genuine mtech springs
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Pretty tired tonight, spent the whole day skiving in the garage.
Fitting a radio is not a small job !! All done now and the sub and amp i got off some dude on here are great.
Checked out the non-existent oil pressure light. Sensor was fine, sadly there was no wire to be found anywhere, must have spent 30mins forensically examining the loom with no luck. So I knocked up a OEM style supply and spliced it onto the Brown/Green from pin 5 of the C101. All good again.
Whilst the clocks were out i fitted a load of this foam, i've used it before and it does cut down some of the noise.


Just got to re-fit the side skirt then it's back on the road for next week.
And finally a star guest appearance this evening from this old turd, which is in the garage of dreams for a quick once over this weekend.

Fitting a radio is not a small job !! All done now and the sub and amp i got off some dude on here are great.
Checked out the non-existent oil pressure light. Sensor was fine, sadly there was no wire to be found anywhere, must have spent 30mins forensically examining the loom with no luck. So I knocked up a OEM style supply and spliced it onto the Brown/Green from pin 5 of the C101. All good again.
Whilst the clocks were out i fitted a load of this foam, i've used it before and it does cut down some of the noise.


Just got to re-fit the side skirt then it's back on the road for next week.
And finally a star guest appearance this evening from this old turd, which is in the garage of dreams for a quick once over this weekend.

-
Mitchen
- E30 Zone Addict

- Posts: 2378
- Joined: Mon Jul 15, 2013 11:00 pm
- Location: London
Bet you can't wait to take that out for a spin again!! 
-
bss325i
- E30 Zone Team Member

- Posts: 24536
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Subs and amps. Thry attract scrotes!

-
Cypriotgeeza
- E30 Zone Addict

- Posts: 3046
- Joined: Sat Apr 04, 2009 11:00 pm
- Location: Under a bonnet somewhere..
Also attracts thy good riddumz!bss325i wrote:Subs and amps. Thry attract scrotes!![]()
Check my M30 build threads:
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
Project Frankenstein: viewtopic.php?f=25&t=194154
Headgasket: viewtopic.php?f=55&t=165704
Clutch issues: viewtopic.php?f=55&t=172482
Instagram: www.instagram.com/Cypriotgeeza
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Oh dear
Them scrotes are going to love the Avez going on next
Note to self....avoid scrotes
Them scrotes are going to love the Avez going on next
Note to self....avoid scrotes
-
bss325i
- E30 Zone Team Member

- Posts: 24536
- Joined: Sat Jan 20, 2007 11:00 pm
- Location: London/Surrey
Kim's reliving his youth! 
-
Mitchen
- E30 Zone Addict

- Posts: 2378
- Joined: Mon Jul 15, 2013 11:00 pm
- Location: London
Claus Luthe's turning in his grave 
-
B7
- E30 Zone Team Member

- Posts: 15846
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
bss325i wrote:Jim's reliving his council yooooot innit!
EFA
B7's Motto. "If it's French, BURN IT!!!!!!"
-
pacerpete
- E30 Zone Team Member

- Posts: 18168
- Joined: Sun Jan 23, 2005 11:00 pm
- Location: Iver heath. South bucks.
B7 wrote:bss325i wrote:Jim's reliving his council yooooot innit!
EFA
Go easy on the bass Jim or all them patches will start falling off !
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
-
B7
- E30 Zone Team Member

- Posts: 15846
- Joined: Tue Feb 13, 2007 11:00 pm
- Location: Surrey / West Sussex
Where's the 'brows? 
B7's Motto. "If it's French, BURN IT!!!!!!"
-
pianist
- E30 Zone Regular

- Posts: 396
- Joined: Mon Mar 12, 2012 11:00 pm
- Location: Lancashire
-
Rav335uk
- E30 Zone Meets/Events Team

- Posts: 27985
- Joined: Wed Jan 19, 2005 11:00 pm
- Location: Mad mad mad
Very nice Jim... 

If you Got "Haters",Then your doing something Right!
CR24v??? Where's it all gone?? LOL
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Thanks Rav, it's not that good close up 
Little package from Cotswold arrived yesterday meaning I could finish off this little 3 week tart up.
So...can anyone guess where all these go?

This speedo is over reading I think.

70mph at 2550 rpm....with a 3.64 diff and 205/50/15s fitted....not quite so sure about that. It should be 2800rpm with 195/55/15 fitted
Fitted the side skirt back on and finally a little clean ready for work duties tomorrow

Little package from Cotswold arrived yesterday meaning I could finish off this little 3 week tart up.
So...can anyone guess where all these go?

This speedo is over reading I think.

70mph at 2550 rpm....with a 3.64 diff and 205/50/15s fitted....not quite so sure about that. It should be 2800rpm with 195/55/15 fitted
Fitted the side skirt back on and finally a little clean ready for work duties tomorrow

-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
2nd one in on top left is for the knee roll? Don't know about the others. 

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
Carmo13
- E30 Zone Regular

- Posts: 269
- Joined: Fri Sep 27, 2013 11:00 pm
- Location: Norwich
Top left is the rear beam exhaust bracket but my tech 1 doesn't have the threaded fixing on the rear beam, does yours or are you going to make something up?
-
Carmo13
- E30 Zone Regular

- Posts: 269
- Joined: Fri Sep 27, 2013 11:00 pm
- Location: Norwich
Third from top left is the icv strap, next is the carbon contact for the horn and some side skirt fixings. Cant put my finger on the others
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Top marks !!
The little hose fits by the fuel pump
The little hose fits by the fuel pump
-
87mtech27
- E30 Zone Camper

- Posts: 1429
- Joined: Mon Feb 02, 2009 11:00 pm
Loving the progress on your E30s Jim.

These are what I would retro fit on mine if I can get my hands on them, keep it old skool cool. RF had the market on locks with The Punch

These are what I would retro fit on mine if I can get my hands on them, keep it old skool cool. RF had the market on locks with The Punch
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Yer those subs look awesome mate, the sort of thing i dreamed about 20 years ago but could only afford the budget stuff
I bought these in the end, well pleased with them
http://www.e30zone.net/modules.php?name ... c&t=256561
For £60, I owe the seller a beer or 2
I bought these in the end, well pleased with them
http://www.e30zone.net/modules.php?name ... c&t=256561
For £60, I owe the seller a beer or 2
-
87mtech27
- E30 Zone Camper

- Posts: 1429
- Joined: Mon Feb 02, 2009 11:00 pm
Your budget sub is way better!!!
The Punch's above are only for keeping it retro. Using them might kill them off
The Punch's above are only for keeping it retro. Using them might kill them off
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Time for a new home ??
-
Gert_8
- Married to the E30 Zone

- Posts: 11305
- Joined: Mon Dec 08, 2008 11:00 pm
- Location: In your back passage faster than a rat up a drainpipe!
Why?! What's happened for you to even consider selling one of your fleet? 

PONY, 2013 - "Anyway span 360 degrees hitting the kerb and giving the old man two fingers as I was spinning like Michael Schumacher would
-
polsta
- Married to the E30 Zone

- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
Sell the granite !! You can't sell one of the 3 tech 1s !!!
-
bab-91
- Married to the E30 Zone

- Posts: 7177
- Joined: Thu Jan 06, 2011 11:00 pm
- Location: Northern Ireland
The Internet - It has proven to be worthless, and is nothing but a repository for perverts.
IG - bab91
IG - bab91
-
Mitchen
- E30 Zone Addict

- Posts: 2378
- Joined: Mon Jul 15, 2013 11:00 pm
- Location: London
Maybe he's got a trick up his sleeve 
-
jimbom30cab
- Tech 1 freak
- Posts: 7634
- Joined: Mon Oct 12, 2009 11:00 pm
- Location: in the garage
Yes...the wife wants a new garden shed





