6spd gearbox

Moderator: martauto

Post Reply
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Thu Apr 23, 2015 1:04 pm

I've been offered a 3.15 lsd, just wondering if this is any use with a 6spd box?

If so, whats involved in going fro ma m42 box to a 6spd box?

What parts that I have for my m52 + m42box do I need to change if I got a 6spd box and which box to use?

I remember reading/hearing with a 6spd box that 1-5 ratios are much the same as with the m42 box but that the 6th gear is an over drive. Ideally looking to have low enough motorway cruising revs but not sacrifice to much in the 1-5 gears. Also what rev would I be at between gears vs the m42 box + 3.64diff
HairyScreech
Engaged to the E30 Zone
Engaged to the E30 Zone
Posts: 6265
Joined: Sun Jan 21, 2007 11:00 pm

Tue Apr 28, 2015 4:37 pm

That will work fine with an E36 M3 box.
5th on that would be the same as on mine with a longer 6th. Think I am geared to about 150mph at 7k in 5th, cruze at 70 around 2500-2700ish.
3.15 + E36 M3 box is pretty much the same gearing as a Z3M but with a 6th gear.
2.8 development thread http://www.e30zone.net/modules.php?name ... c&t=170822

m3.3.1 m20 thread - now running, chip needed - any volunteers?
http://www.e30zone.net/modules.php?name ... =viewtopic&
User avatar
mattxr2
E30 Zone Regular
E30 Zone Regular
Posts: 327
Joined: Tue Nov 04, 2008 11:00 pm

Tue Apr 28, 2015 10:04 pm

Gear ratio calculator on end tuning website
appletree
E30 Zone Addict
E30 Zone Addict
Posts: 3482
Joined: Fri Jan 20, 2006 11:00 pm
Location: Retford

Tue Apr 28, 2015 10:34 pm

I have a 3.07 on my 6 speeder and 6th is a overdrive, will cruise at 60 ok but happier a 70+ with the 6speeders lower 1-3 gears it's like a 5 speed with a 6th rather than a 6 speed with 6 if you get what I mean, would guess 3.15 would be perfect. :D
Image

You should never underestimate the predictability of stupidity

M42 Supercharged 285bhp + M3 6speed box
User avatar
Jozi
E30 Zone Addict
E30 Zone Addict
Posts: 3076
Joined: Thu Nov 22, 2007 11:00 pm
Location: Dublin, Ireland

Tue Apr 28, 2015 10:55 pm

whats involved though in going to 6spd? Besides the box I think I need a modified prop combining an m3 with a e30 prob shaft? And will the box be at a funny angle like with a m20 box?
age
Formerly twist316
Posts: 448
Joined: Sun Dec 28, 2008 11:00 pm
Location: cork ireland (kosice slovakia)

Wed Apr 29, 2015 6:36 am

m3 box will sit at the correct angle for the m52 jozi
M40 rightness if you can get to 6000rpm noone can hear your tappets
Post Reply