2 speed fan help

Moderator: martauto

P_VIDDY
E30 Zone Regular
E30 Zone Regular
Posts: 426
Joined: Fri Jan 06, 2006 11:00 pm
Location: Derby

Post Fri Apr 24, 2015 8:23 pm

Hi,

Trying to wire up my 2 speed fan.

I have high speed running (and working) through k6 relay.

When I tried to wire k1 relay to run low speed there is only one slot for me to add a wire... 85-ground. The 86 terminal is soldered to the board?

Thanks
Top
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Apr 24, 2015 8:29 pm

86 is ground, test light will confirm :wink:
Top
P_VIDDY
E30 Zone Regular
E30 Zone Regular
Posts: 426
Joined: Fri Jan 06, 2006 11:00 pm
Location: Derby

Post Fri Apr 24, 2015 8:35 pm

You sure dan? As on the k6 relay 85 was ground? Packed up tools for night so will carry on tomorrow afternoon
Top
JF008
E30 Zone Regular
E30 Zone Regular
Posts: 631
Joined: Tue Jan 17, 2012 11:00 pm
Location: Fort McMurray

Post Fri Apr 24, 2015 9:31 pm

Only one of the two relay needs a ground added. Well if Dan said it lol but I've wired my fan not long ago and that's how it is :D
Top
P_VIDDY
E30 Zone Regular
E30 Zone Regular
Posts: 426
Joined: Fri Jan 06, 2006 11:00 pm
Location: Derby

Post Fri Apr 24, 2015 9:46 pm

Ok that slot must need the wire from the sensor then to trigger the relay. Thanks
Top
DanThe
E30 Zone Team Member
E30 Zone Team Member
Posts: 28649
Joined: Sat Sep 10, 2005 11:00 pm
Location: Staffs

Post Fri Apr 24, 2015 10:02 pm

P_VIDDY wrote:You sure dan? As on the k6 relay 85 was ground?
Only because thats the pin you put it on, as I said, test light will confirm 8)
Last edited by DanThe on Fri Apr 24, 2015 11:04 pm, edited 1 time in total.
Top
P_VIDDY
E30 Zone Regular
E30 Zone Regular
Posts: 426
Joined: Fri Jan 06, 2006 11:00 pm
Location: Derby

Post Fri Apr 24, 2015 10:06 pm

Yeah I'm with it now Dan. Cheers
Top

Return to “M50 / M52 Engines”