Help with megasquirt 2 and custom loom please

[WEEMANDANBRITTON]

Right basically im going to buy a mega squirt ms2 v3 ecu, i want to make a custom wiring loom for the engine, im going to be running a standard m44b19 to begin with, it will however be fitted with s50b30 throttle boddies and a plenum (custom made ready to go!!) i want to run a maf instead of an afm and want to do a wire tuck!! The m42b18 will go back in eventually with an eaton 45 supercharger from a cooper s mini!! Basically my question is, does anyone have a diagram of the megasquirt plug so i know which wire goes where?? It will be running cop so i will have the extra coil driver, tried googleing but cant find anything!! Any help will be much appreciated!

[gromgsxr]

the main wiring for the ecu will be fairly standard just the options like what pins are being used for the maf input and the extra coil out puts?

[gromgsxr]

http://www.msextra.com/doc/pdf/MS2V30_Hardware-3.3.pdf have a look about page 14

[NoTurbo]

it is in the WIKI

http://www.e30zone.net/e30zonewiki/inde ... CU_Pinouts

Have you bought the Megasquirt system yet?

[WEEMANDANBRITTON]

Cheers