Front brake backing plates
Moderator: martauto
-
polsta
- Married to the E30 Zone
- Posts: 10322
- Joined: Fri Oct 09, 2009 11:00 pm
- Location: portsmouth
The backing plates on the front struts /brakes , can they be removed and re fitted with the strut and brakes still in place or whst has to be done ?
-
capri_rob
- Married to the E30 Zone
- Posts: 9678
- Joined: Tue Feb 19, 2008 11:00 pm
- Location: South Staffordshire
Can only be removed if you cut them off or remove the wheel bearing.
e30topless said : Proper BMW's have 4 headlights, last of the run was the E30 and E34/E32 anything after that is just complete shite
-
BHadley
- E30 Zone Regular
- Posts: 902
- Joined: Sun Sep 06, 2009 11:00 pm
- Location: Newton abbot, Devon
Mines a facelift and was bolted on with 3 small 10mm bolts .
Remove the disc and you should see the crusty remains...
If not try looking from the back of the strut assembly
Remove the disc and you should see the crusty remains...
If not try looking from the back of the strut assembly
-
RB2
- E30 Zone Newbie
- Posts: 117
- Joined: Mon Mar 04, 2013 11:00 pm
You still need to remove the wheel bearing unless yours were very corroded
-
BHadley
- E30 Zone Regular
- Posts: 902
- Joined: Sun Sep 06, 2009 11:00 pm
- Location: Newton abbot, Devon
Thinking it about it they where, must have dislodged a bit and the rest pulled through!